Skip to content
Salice Progressa Narrow Rear Mount Socket, 1.5 in. Wide Steel, Non-Handed
Regular price $0.65Orders start at $399 — combine any items to reach the minimum. Learn more
Salice Progressa Narrow Rear Mount Socket, 1.5 in. Wide Steel, Non-Handed
This is a narrow 1.5 inch wide rear mount steel socket for Salice Progressa face frame runners, sold individually. The non-handed socket features lateral self-alignment, and the manufacturer calls for a minimum of four screws per socket. Note that mounting to a face frame without blocking reduces Progressa load capacity to 75 lbs.
Key Features:
- Narrow Profile: Rear mount socket is 1.5 inches wide for face frame applications.
- Non-Handed: One socket design serves both left and right sides, sold individually.
- Self-Aligning: Lateral self-alignment helps the runner seat correctly in the socket.
- Steel Construction: Made of steel for secure rear support of the slide member.
- Four-Screw Mount: Use a minimum of 4 screws per socket for proper holding power.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Salice |
| Sell unit | 1 piece |
| Series | Progressa |
| Material | Steel |
| Width | 1.5 in. |
| Mounting | Rear mount |
| Handing | Non-handed, sold individually |
| Alignment | Lateral self-alignment |
| Fastening | Minimum 4 screws per socket |
| Load rating note | Face frame mounting without blocking out reduces Progressa load capacity to 75 lb |
| Intended use | Rear support for Progressa face frame runners |
Fit and Compatibility:
Designed for Salice Progressa face frame runners. Screws are not listed as included; one socket per order, so buy two per drawer. Face frame mounting without blocking out limits load capacity to 75 lbs.
Frequently Asked Questions (FAQ):
Q: Is one socket enough for a drawer?
A: No, a drawer needs one socket at each rear end of the slide, so order two; each is sold individually and is non-handed.
Q: How many screws per socket?
A: Use a minimum of 4 screws per socket.
Q: Will it fit face frame cabinets?
A: Yes, it is made for Progressa face frame runners; use blocking out to preserve full load capacity.
Q: What happens without blocking?
A: Mounting directly to the face frame without blocking out reduces the Progressa slide load capacity to 75 lbs.
Q: Does it matter which side I install it on?
A: No, the socket is non-handed with lateral self-alignment.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
When installing Progressa runners in face frame cabinets, add a blocking strip behind the face frame so the rear socket lands on solid material and the slides keep their full load rating. Because the socket is non-handed with lateral self-alignment, you can fine-tune the rear position slightly before final tightening. Fasten with at least four screws per socket so the runner cannot rack under load.
Fasten each socket with the minimum four screws and verify the blocking is secure before loading the drawer.
Add the Salice Progressa narrow rear mount socket for solid face frame slide support.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
