Skip to content
Salice Progressa Drilling Template for Locking Device Clips and Rear Bayonet Holes
Regular price $29.76Orders start at $399 — combine any items to reach the minimum. Learn more
Salice Progressa Drilling Template for Locking Device Clips and Rear Bayonet Holes
The Salice Progressa drilling template guides hole placement for locking device clips and rear bayonet holes on Progressa drawer installations. Drilling bits of 3/32 in. (2.5mm) and 1/4 in. (6mm) are required and are sold separately. It is an accessory for Salice Progressa and Progressa+ undermount runner systems.
Key Features:
- Accurate hole layout: Templates the drilling positions for Progressa locking device clips.
- Rear bayonet holes: Also guides the rear bayonet mounting holes for the runner.
- Faster install: Removes layout guesswork and speeds repeatable drawer setup.
- Shop accessory: Designed for Salice Progressa and Progressa+ runner installations.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Salice |
| Sell unit | 1 piece |
| Series | Progressa |
| Nominal size | For locking device clips and rear bayonet holes |
| Intended use | Drilling guide for Progressa drawer slide installation |
| Required bits | 3/32 in. (2.5mm) and 1/4 in. (6mm), sold separately |
Fit and Compatibility:
For use with Salice Progressa and Progressa+ undermount runners when installing locking device clips and rear bayonet holes. Drill bits are sold separately.
Frequently Asked Questions (FAQ):
Q: What holes does this template locate?
A: It locates the holes for Progressa locking device clips and the rear bayonet holes.
Q: Are drill bits included?
A: No, the 3/32 in. (2.5mm) and 1/4 in. (6mm) bits are sold separately.
Q: Which slides does it work with?
A: It is made for Salice Progressa and Progressa+ drawer runner installations.
Q: Do I need this template?
A: It is recommended for accurate, repeatable placement of locking device clip and rear bayonet holes.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use the template on every drawer in a run so locking devices and bayonet holes land at identical heights; small variations show up as misaligned fronts. Clamp the template securely and drill with a sharp bit to avoid tear-out on plywood drawer bottoms and backs. Keep one template per shop station to keep production moving.
Clamp the work and template before drilling and wear safety glasses.
Speed accurate Progressa installs with the Salice drilling template.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
