Skip to content
Rollex ODE Aluminum Drip Edge 1-3/4 in. x 12 ft., Multiple Colors
Regular price $28.50Orders start at $399 — combine any items to reach the minimum. Learn more
Rollex ODE Aluminum Drip Edge 1-3/4 in. x 12 ft., Multiple Colors
Rollex ODE drip edge is metal roof-edge flashing sold in 12 ft. lengths with a 1-3/4 in. profile, in Black (hemmed), Snow Mist, Evergreen and Cobblestone. Installed under the shingles at the roof line, it directs water off the roof edge and into the gutters while protecting the fascia. Choose the color that matches your gutter or trim package.
Key Features:
- Controls water flow: Installed at roof edges to help control water flow away from the fascia and protect underlying roofing components.
- Gutter-directed runoff: Placed under the shingles at the roof line so water runs off the edge and into the gutters.
- Long 12 ft. lengths: Offered in 12 ft. pieces to reduce joints along the eave and rake.
- Four color choices: Available in Black (1-3/4 in. hemmed), Snow Mist, Evergreen and Cobblestone.
- Shingle overhang guide: Shingles should extend 1/2 in. to 3/4 in. past the drip edge for correct runoff direction.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Rollex |
| Sell unit | 1 piece, 1-3/4 in. x 12 ft. |
| Product line | ODE Drip Edge |
| Available colors | Black, Snow Mist, Evergreen, Cobblestone |
| Available sizes | 1-3/4 in. x 12 ft. (Black listed as 1-3/4 in. hemmed) |
| Dimensions | 1-3/4 in. profile x 12 ft. length |
| Material | Metal flashing (Rollex metal edging) |
| Intended use | Roof-edge flashing at eaves and rakes to direct water to gutters |
Coverage & How Much You Need:
Each piece is 12 ft. long, so divide total eave plus rake linear footage by 12 to estimate pieces, adding for lap and waste at corners. Shingles should overhang the drip edge by 1/2 in. to 3/4 in.
Fit and Compatibility:
Designed for use with asphalt or metal roofing at the eave and rake, paired with gutters sized to catch runoff. Fasteners and valley or wall flashing are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One piece of Rollex ODE drip edge in your chosen color and 1-3/4 in. x 12 ft. size (Black is listed as hemmed).
Q: How much do I need?
A: Measure total eave and rake linear feet and divide by 12 ft. per piece, adding extra for laps and corner cuts.
Q: Which colors are available?
A: Black, Snow Mist, Evergreen and Cobblestone.
Q: How far should shingles overhang?
A: Shingles should extend 1/2 in. to 3/4 in. past the drip edge: too far risks wind damage, too little allows driving rain under them.
Q: Where is it installed?
A: Under the shingles at the roof line, directing water off the roof edge and into the gutters.
Q: Why does shingle overhang matter?
A: The drip edge plus overhang keep water directed to the gutter and off the fascia, protecting the underlying roofing components.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Drip edge is cheap insurance for the fascia and deck edge, so run it along both eaves and rakes on every shingle job. Install eave edge first under the underlayment and rake edge over it, and keep shingle overhang at 1/2 to 3/4 inch per Rollex guidance. Pick the Snow Mist, Evergreen or Cobblestone finish to match your gutter color, or the hemmed Black profile where a tighter hemmed edge is preferred.
Cut metal edges leave sharp burrs; wear cut-resistant gloves and eye protection when handling and snipping drip edge.
Order Rollex ODE drip edge in four colors to protect your roof edge and feed your gutters cleanly.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
