RMax Durasheath®3 4ft x 8ft Insulation Board - All Sizes

$15,012.93 $14,112.15

Save $900.78
/
Shipping calculated at checkout.
Zone States
1 Arizona, California, Idaho, Nevada, Oregon, Utah, Washington, Montana, New Mexico, Wyoming, Colorado
2 Georgia, Alabama, Mississippi, Tennessee, Kentucky, Florida, South Carolina, North Carolina, Ohio, Indiana, Illinois, Michigan, Wisconsin, West Virginia, Virginia, Pennsylvania, Maryland, Delaware, New Jersey, Connecticut, Massachusetts, Rhode Island, Maine, New Hampshire, Vermont, New York
3 Louisiana, Texas, Oklahoma, Missouri, Minnesota, North Dakota, South Dakota, Nebraska, Kansas, Arkansas, Iowa

 

Rmax Durasheath®-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam core bonded to inorganic polymer-coated glass fiber mat facers on each side. It offers energy performance and superior durability and is intended for use in exterior walls with stucco veneer, concrete sandwich panels, and many other building envelope applications, including those where an impermeable foil-faced product is not desired.

Thickness Sq Ft/Pallet Sheets Per Pallet R-Value Minimum Order
0.5" 3072 96 R3 6 Pallets
0.75" 1920 64 R4.5 6 Pallets
1" 1536 48 R6 6 Pallets
1.5" 1024 32 R9 6 Pallets
2" 768 24 R12.1 6 Pallets
2.5" 608 19 R15.3 6 Pallets
3" 512 16 R18.5 6 Pallets
3.5" 416 13 R21.7 6 Pallets
4" 384 12 R25 6 Pallets
4.5" 320 10 R30 6 Pallets

COMPLIANCES

  • 1. ASTM C1289 Type II, Class 2
  • 2. International Building Code (IBC) Section 2603, Foam Plastic
  • 3. ASHRAE 90.1
  • 4. CA Insulation Directory
  • 5. Tested per NFPA 286 (ICC-ES AC12 Appendix B)
  • 6. 1, 2, 3 or 4 hour Fire Rated Assemblies as shown in the UL Fire Resistance Directory

 

TYPICAL PHYSICAL PROPERTIES

Property
Test Method
 
Results
 
Density, Overall, Nominal ASTM D1622      2.0 pcf
Compressive Strength ASTM D1621      20 psi
Flame Spread, Core2 ASTM E84      75 or less
Smoke Developed, Core2 ASTM E84       <450
Air Barrier ASTM E2178       < 0.02 L/(s.m2 )
Water Vapor Transmission ASTM E96       < 1.5 perm
Water Absorption ASTM C209       < 1% Vol.
Dimensional Stability, Length and Width ASTM D2126       < 2% Linear Change
Mold Resistance ASTM D3273      10, no defacement
Service Temperatures         250°F max

CONSTRUCTION APPLICATIONS

  • 1. Stud walls
  • 2. Cavity walls
  • 3. Masonry walls
  • 4. Exterior stucco
  • 5. Re-siding
  • 6. Vaulted-ceilings
  • 7. Attics and crawls spaces
  • 8. Limited roofing
*Third Party Trademarks

All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.

Subject to Approval & Availability
All orders are reviewed before fulfillment. You are not charged until your order is approved and ready to ship — and you may cancel at any time before that at no cost.

Why choose us

The Arbor Way

• Lowest Prices. Easy Online Shopping. Fast Delivery.

• No lines. No holds. No Hassles.

• America's Largest Inventory Network for All Home Improvement Supplies Nationwide.

• We deliver - town to town, door to door. 

Recently viewed

\