Skip to content
ProWorx Plastic Rebar-Mesh Chairs for #3 and #4 Rebar, 2 in./2.5 in. Height, 50-Pack – 832012
Regular price $17.99Orders start at $399 — combine any items to reach the minimum. Learn more
ProWorx Plastic Rebar-Mesh Chairs for #3 and #4 Rebar, 2 in./2.5 in. Height, 50-Pack
These PROWORX plastic rebar-mesh chairs support #3 and #4 rebar or welded wire mesh at 2 in. or 2.5 in. height while concrete is poured. Each chair holds up to two pieces of rebar, and the pack contains 50 chairs. They speed up rebar placement on slabs, walls and flooring pours.
Key Features:
- Holds #3 and #4 rebar: Chairs are designed to hold #3 and #4 rebar as well as wire mesh.
- Two-height design: Supports rebar at heights of 2 in. or 2.5 in. above the surface.
- Holds two bars: Each chair is designed to hold up to two pieces of rebar at once.
- Faster placement: Plastic chairs make placement of the rebar support system faster than improvised supports.
- 50-chair pack: Each package contains 50 plastic chairs for a full slab pour.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | ProWorx |
| Manufacturer model | 832012 |
| UPC | 651082832012 |
| Sell unit | Pack of 50 chairs |
| Material | Plastic (listed by one source as polypropylene; primary material listed as steel in another spec table) |
| Color / finish | Black |
| Nominal size | 4.33 in. x 4.33 in. x 2.83 in. chair |
| Length | 4.33 in. |
| Width | 4.33 in. |
| Thickness | 2.83 in. |
| Bar capacity | Holds #3 and #4 rebar, up to 2 pieces |
| Chair height | 2 in. or 2.5 in. |
| Pack quantity | 50 chairs |
| Weight per chair | 0.09 lb |
| Intended use | Supporting rebar and mesh above ground until concrete is poured |
Coverage & How Much You Need:
Space plastic chairs roughly every 2 to 3 ft. in both directions on the slab, so a 50-pack covers roughly 200 to 450 sq. ft. of mesh or rebar depending on spacing.
Fit and Compatibility:
Fits #3 and #4 rebar and standard welded wire mesh sheets. Pair with PROWORX rebar ties, rebar pins and wire twisters for a complete reinforcement setup.
Frequently Asked Questions (FAQ):
Q: What is included?
A: A pack of 50 black plastic rebar-mesh chairs, each supporting rebar at 2 in. or 2.5 in. height.
Q: Which rebar sizes do they hold?
A: The chairs hold #3 and #4 rebar, and each chair can support up to two pieces of rebar or mesh.
Q: How many chairs do I need?
A: Place chairs roughly every 2 to 3 ft. in both directions; a 50-pack typically covers a medium residential slab depending on spacing.
Q: Why use plastic chairs instead of bricks or rocks?
A: Plastic chairs hold consistent cover height, speed placement and will not introduce debris or corrosion issues like improvised supports.
Q: How do I use them?
A: Set the chairs on the prepared surface, lay rebar or mesh into the chair seats, then pour concrete over the supported steel.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Pick the 2 in. position for slabs on grade and the 2.5 in. position where a bit more cover is needed. Space chairs at consistent intervals so the rebar stays at the correct cover height during the pour, and walk the grid carefully or use additional chairs in traffic areas. Always check local building codes before starting your project.
Always check local building codes before starting your concrete project; chairs must remain in place during the pour to maintain proper bar cover.
Order the PROWORX plastic rebar-mesh chairs, 50-pack, to keep your rebar and mesh at the right height on the next pour.
Product Documents:
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
