POWERS 0.27 Caliber Green 10-Load Safety Strip Powder Loads, 100 per Package – 50622

This is the Powers (DEWALT) 50622 .27 caliber green 10-load safety strip, supplied as a package of 100 powder loads. The green color-coded loads are collated 10 per plastic strip for use in semi-automatic powder-actuated tools such as the Powers P3500, P3500/PA3500, PA351, P3600, and Sniper. Brass load construction is designed for consistent, reliable performance.

Key Features

• .27 Caliber Loads: These are .27 caliber powder loads designed for .27 caliber powder-actuated tools.
• Green Power Level: Green color-coding identifies the power level so workers match the correct load to the fastener and base material.
• 10-Load Safety Strips: Loads are collated in groups of 10 into plastic strips for semi-automatic tool feed.
• Brass Construction: Brass load material supports consistent and reliable performance.
• Wide Tool Compatibility: Compatible with Powers P3500, P3600, PA3500, PA351, Sniper and Ramset SA270, Viper, Cobra, plus Hilti DX350, DX351, DX36M, DX451, DX460 and DX2 semi-automatic tools.
• 100 per Package: Each package contains 100 loads, sized for multiple days of production fastening.

Specifications

Manufacturer model

50622

UPC

075352622439

Sell unit

Package of 100 .27 caliber green 10-load strips (1,000 loads collated 10 per strip, packaged 100 strips)

Material

Brass

Color / finish

Green

Caliber

0.27 caliber

Type

10-load safety strip

Pack quantity

100 loads per package

Collation

10 loads per plastic strip

Compatible tools

Powers P3500, P3600 semi-automatic, PA3500, PA351, Sniper; Ramset SA270, Viper, Cobra; Hilti DX350, DX351, DX36M, DX451, DX460, DX2

Intended use

Powder-actuated fastening

Country of origin

USA

Product weight, complete sell unit

0.3 lb

Fit and Compatibility

For use with .27 caliber semi-automatic powder-actuated tools including the Powers P3500, P3600, PA3500, PA351 and Sniper, and Ramset and Hilti semi-automatic models listed above. Single-shot tools use individual cartridge loads, not strips; select the correct load level for the fastener and base material.

Frequently Asked Questions

What is included in a package?

A package contains 100 .27 caliber green powder loads, collated 10 per plastic safety strip.

Which tools do these loads fit?

They fit .27 caliber semi-automatic tools such as Powers P3500, P3600, PA3500, PA351, Sniper, Ramset SA270, Viper, Cobra, and Hilti DX350, DX351, DX36M, DX451, DX460 and DX2 models.

What does the green color mean?

Powder loads are color-coded and numbered by power level so the correct force is matched to the fastener and material.

What are the loads made of?

The load cases are brass.

Can I use strips in a single-shot tool?

No, strips are for semi-automatic tools; single-shot tools take single cartridge units, which are offered separately.

Do I need training to use powder loads?

Yes, OSHA regulations require training and certification for employees who use powder-actuated tools and loads.

Product Expert Notes

Always start with the lowest load level that drives the fastener to proper depth, testing on the actual base material before production work; move up through the color/number levels only as needed. Green is one of the mid-range levels in the load color chart, so verify against your tool's load selection guide. These strips suit high-volume semi-automatic tools like the P3500, while single-shot tools need individual cartridge loads instead.

Powder loads contain propellant and are explosive; store, transport and use only in approved powder-actuated tools by trained, certified operators wearing full eye and hearing protection per OSHA requirements.

Order the Powers .27 caliber green 10-load safety strips for reliable, color-coded powder-actuated fastening.