Skip to content
Polyglass PolyBrite 97X Two-Component Water-Based Epoxy Primer – Part A and Part B, 5 Gallon Each
Regular price $316.50Orders start at $399 — combine any items to reach the minimum. Learn more
Polyglass PolyBrite 97X Two-Component Water-Based Epoxy Primer – Part A and Part B, 5 Gallon Each
PolyBrite 97X is a two-component, 1-to-1 ratio water-based epoxy primer that enhances adhesion to a wide variety of porous and non-porous substrates. It cures to a hard, lusterless coating. Part A (white) and Part B (dark gray) are supplied in separate 5-gallon units.
Key Features:
- Two-Component Epoxy: Two components mixed at a 1-to-1 ratio form the epoxy primer.
- Broad Substrate Range: Enhances adhesion to a variety of porous and non-porous substrates.
- Hard Matte Cure: Cures to form a hard lusterless coating.
- Low VOC: Low VOC formulation.
- Non-Flammable: Non-flammable, water-based chemistry.
- Versatile Prep: A versatile primer for a wide variety of substrate conditions.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Polyglass |
| Sell unit | 1 pail, 5 gal (Part A or Part B sold separately) |
| Product line | Polyglass PolyBrite 97X epoxy primers |
| Material | Water-based two-component epoxy |
| Color / finish | Part A white, Part B dark gray; cures to a hard lusterless coating |
| Available sizes | 5 gal Part A and 5 gal Part B |
| Mix ratio | 1 to 1 |
| Available colors | White (Part A), Dark Gray (Part B) |
| Intended use | Adhesion-promoting primer for porous and non-porous substrates prior to coating |
Coverage & How Much You Need:
Coverage rates are not stated in the sources; size your order from total substrate area and the label's application rate, noting both Part A and Part B are needed in equal quantities.
Fit and Compatibility:
Use as an adhesion-promoting primer beneath coatings on a wide variety of porous and non-porous substrates. Both the Part A and Part B components are required; each is sold in a separate 5-gallon unit.
Frequently Asked Questions (FAQ):
Q: What is included with my order?
A: Ordering Part A gives one 5-gallon unit in white, and Part B is a separate 5-gallon unit in dark gray; both are required at a 1-to-1 ratio.
Q: How is it mixed?
A: It is a two-component epoxy mixed at a 1-to-1 ratio.
Q: What substrates can it prime?
A: It enhances adhesion to a wide variety of porous and non-porous substrates.
Q: What finish does it leave?
A: It cures to form a hard, lusterless coating.
Q: Is it safe to handle indoors?
A: It is low VOC, non-flammable and water-based; still follow label safety instructions.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
When a coating project involves mixed or slick substrates, a 1:1 water-based epoxy primer like PolyBrite 97X gives you a hard, uniformly bonded base without flammable solvent handling. Mix equal volumes of Part A and Part B and apply within the working window per label. Order equal quantities of both components – running short on either stops the job.
Follow the product's handling instructions for mixing two-component epoxies, including eye and skin protection and adequate ventilation.
Order Polyglass PolyBrite 97X Epoxy Primer for reliable adhesion on demanding substrates.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
