Skip to content
PLI-DEK G90 Hot-Dip Galvanized Metal Lath 27 in. x 96 in.
Regular price $35.50Orders start at $399 — combine any items to reach the minimum. Learn more
PLI-DEK G90 Hot-Dip Galvanized Metal Lath 27 in. x 96 in.
This Pli-Dek G90 metal lath is a hot-dip galvanized steel lath sheet measuring 27 in. x 96 in., used as a reinforced base in Pli-Dek waterproof deck and coating systems. One order unit is a single piece (EA). It pairs with Pli-Dek membrane and coating products to build a complete deck assembly.
Key Features:
- G90 galvanization: The steel sheet is hot-dip galvanized to a G90 coating weight for corrosion resistance.
- Full-size sheet: Each piece measures 27 in. x 96 in., covering an 8-ft run.
- Reinforcing base: Metal lath serves as the reinforcing substrate for Pli-Dek waterproof decking applications.
- System matched: It is produced by Pli-Dek for use within the Pli-Dek deck coating system.
- Decking category: It is classified under decking and railing building materials for exterior deck work.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Pli-Dek |
| Sell unit | 1 piece, 27 in. x 96 in. lath sheet |
| Product line | Pli-Dek G90 Metal Lath |
| Material | Hot-dip galvanized steel (G90 coating) |
| Available sizes | 27 in. x 96 in. (single listed size) |
| Dimensions | 27 in. x 96 in. |
| Length | 96 in. |
| Width | 27 in. |
| Intended use | Reinforcing lath base for Pli-Dek waterproof deck coating systems |
| Assembly | Fasten to substrate and embed within the Pli-Dek coating assembly |
Coverage & How Much You Need:
One 27 in. x 96 in. sheet covers approximately 18 sq ft before laps. Lath sheets are typically lapped at edges during installation, so plan material accordingly and confirm lap requirements with the Pli-Dek system specification.
Fit and Compatibility:
Designed for use within the Pli-Dek waterproof deck and coating system as the metal lath reinforcement layer. Membranes, coatings and other system components are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One order unit is a single 27 in. x 96 in. piece of G90 hot-dip galvanized metal lath.
Q: How much area does one piece cover?
A: A sheet measures 27 in. by 96 in., about 18 sq ft, though usable coverage is reduced by required laps.
Q: Will it rust outdoors?
A: The sheet is hot-dip galvanized to G90, a zinc coating that resists corrosion when embedded in the deck assembly.
Q: Can I use it with other deck coating brands?
A: It is made by Pli-Dek for the Pli-Dek system; using it within that system ensures the components are matched.
Q: How is it installed?
A: The lath is fastened to the prepared substrate and encapsulated in the Pli-Dek coating assembly per system details.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Metal lath is the reinforcement backbone of a Pli-Dek deck assembly, so use full, undamaged sheets and maintain the laps and fastening pattern called out in the system details. Because this is a G90 hot-dip galvanized product, keep it dry until installed and encapsulated. Order lath along with the matching Pli-Dek membranes and coatings so the full assembly arrives together.
Metal lath edges and cut ends are sharp; wear cut-resistant gloves, long sleeves and eye protection when handling and cutting lath.
Order Pli-Dek G90 hot-dip galvanized metal lath today to build the reinforcement layer of your waterproof deck system.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
