PITTCON PCS Series Aluminum Channel Screed, 1/2 in. Width x 3/4 in. Depth, Clear Anodized – PCS-75-50

This is a PCS-75-50 channel screed from the Pittcon PCS Series, an aluminum plaster and stucco screed molding with a 1/2 in. width (Dim A) and 3/4 in. depth (Dim B). It establishes proper stucco and plaster thickness while adding an architectural reveal to walls and ceilings. One piece is the sell unit.

Key Features

• Aluminum construction: Extruded aluminum molding for plaster and stucco work.
• 1/2 in. reveal: 1/2 in. width provides a compact architectural reveal.
• 3/4 in. depth: 3/4 in. depth sets the proper stucco or plaster thickness.
• Architectural accent: Traditional channel screed molding that gives architectural accents to stucco walls and ceilings.
• Vented option: The PCS Series is also available vented (PCS-75-V-50) for soffit ventilation applications.
• Customizable: Channel screeds can be fabricated into custom intersections and curved to custom radii.

Specifications

Manufacturer model

PCS-75-50

Sell unit

1 screed piece

Material

Extruded aluminum

Color / finish

Clear anodized (per matching Fry Reglet PCS-75-50 listings)

Nominal size

1/2 in. width x 3/4 in. depth

Width

1/2 in. (12.7 mm) Dim A

Height

3/4 in. (19.1 mm) Dim B

Series

PCS Series

Length

10 ft per piece (per matching PCS-75-50 listings)

Intended use

Establishing stucco and plaster thickness; architectural reveal on walls, ceilings and soffits

Alloy specification

Extruded alloy 6063 T5 with chemical conversion coating, clear anodized (per matching listings)

Coverage and How Much You Need

Each 10 ft piece covers 10 linear feet of wall, ceiling or soffit run. Measure the total linear footage of screed lines on the drawings and order the number of pieces needed, cutting to fit at terminations and intersections.

Fit and Compatibility

This screed installs embedded in plaster or stucco and pairs with other matching reveal moldings for a consistent look. Within the PCS Series, wider widths from 1/2 in. to 6 in. and a vented PCS-75-V-50 version are available from the same family if a different reveal or soffit ventilation is required.

Frequently Asked Questions

What are the dimensions of this screed?

The PCS-75-50 has a 1/2 in. width (Dim A) and a 3/4 in. depth (Dim B).

What is it used for?

It establishes the proper thickness of stucco and plaster and provides an architectural channel reveal on walls, ceilings and soffits.

How long is each piece?

Matching PCS-75-50 channel screed listings specify 10 ft per piece; confirm piece length before ordering.

Is there a vented version?

Yes, the PCS Series includes a vented PCS-75-V-50 in the same 1/2 in. width and 3/4 in. depth for soffit ventilation.

What is it made of?

Extruded aluminum; matching listings specify alloy 6063 T5 with a clear anodized finish.

Can it be curved or customized?

Yes, channel screeds can be fabricated into custom intersections and curved to a wide range of custom radius requirements.

Product Expert Notes

Use the PCS-75-50 where a compact 1/2 in. reveal is specified and a 3/4 in. plaster or stucco build is required. Fasten it plumb and level to the substrate before plastering so the reveal reads cleanly across the wall. Step up to a wider width in the same series if the design calls for a bolder shadow line, or to the vented variant for soffits.

Cut aluminum screed edges can be sharp; wear gloves and eye protection when cutting and handling, and secure the screed firmly before plastering overhead.

Add the PCS Series 1/2 in. x 3/4 in. aluminum channel screed to your plaster and stucco material list today.