Skip to content
Palmer Asphalt #201 Bulldog 4 in. x 150 ft. Asphalt Saturated Cotton Fabric Roll
Regular price $18.67Orders start at $399 — combine any items to reach the minimum. Learn more
Palmer Asphalt #201 Bulldog 4 in. x 150 ft. Asphalt Saturated Cotton Fabric Roll
Palmer Asphalt #201 Bulldog asphalt-saturated cotton fabric comes in a 4-inch by 150-foot roll for reinforcing flashing cement and roof repairs. One roll weighs about 3 lb, and boxes are packed 12 rolls per carton. Embed it in asphalt mastic or cement to bridge joints, seams and splits.
Key Features:
- Asphalt saturated: Cotton fabric saturated with asphalt for compatibility with roofing cements and mastics.
- 4 in. width: 4-inch roll width suits seams, splits and flashing joints.
- 150 ft. long: 150-foot roll provides up to 150 linear feet of reinforcement.
- Bulldog #201: Palmer Asphalt's #201 Bulldog commercial fabric grade.
- Carton packed: Ships 12 rolls per box and 12 pieces per carton.
- Lightweight roll: Each roll weighs approximately 3 lb.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Palmer Asphalt |
| Manufacturer model | CF04 |
| Sell unit | 1 roll, 4 in. x 150 ft. (12 rolls per carton) |
| Product line | #201 Bulldog |
| Material | Asphalt-saturated cotton fabric |
| Dimensions | 4 in. x 150 ft. |
| Pack quantity | 12 rolls per box; 12 pieces per carton |
| Weight | 3 lb per roll |
| Intended use | Reinforcement fabric for roofing cements, mastics and repairs |
Coverage & How Much You Need:
One roll provides 150 linear feet of 4-inch-wide reinforcing fabric. Measure each joint or seam to be embedded and allow slight overlap at fabric ends when planning rolls per job.
Fit and Compatibility:
Designed to be embedded in Palmer Asphalt and other compatible asphalt roof cements, coatings and mastics. Not a standalone waterproofing layer; it must be encapsulated in cement or coating.
Frequently Asked Questions (FAQ):
Q: What is included in one order unit?
A: One 4 in. x 150 ft. roll of #201 Bulldog asphalt-saturated cotton fabric; 12 rolls come per box or carton.
Q: How much does one roll cover?
A: Up to 150 linear feet of 4-inch-wide reinforcement.
Q: How is it installed?
A: Embed the fabric into a wet layer of asphalt cement or mastic over the repair, then coat over the top per the cement manufacturer's directions.
Q: Will it work with any roofing cement?
A: It is asphalt-saturated cotton, so it is compatible with asphalt-based cements and mastics.
Q: What is it used for?
A: Reinforcing flashing joints, seams, splits and repairs on built-up and asphalt-based roof systems.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Asphalt-saturated cotton fabric like Bulldog #201 is the traditional reinforcement for flashing cement repairs and BUR details because it conforms over irregular surfaces better than fiberglass mesh. Apply a bed of cement, work the fabric in fully with a trowel to eliminate voids, then top-coat generously. For wider splits, use a 6-inch fabric or double-course the 4-inch width.
Asphalt cements and solvent-based mastics are flammable and hot work nearby is hazardous; keep ignition sources away and follow the SDS.
Get Palmer Asphalt #201 Bulldog 4 in. x 150 ft. reinforcing fabric for durable roof repairs.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
