Owens Corning VentSure Sky Runner LTE Ridge Vent Roll 12 in x 30 ft
Regular price $129.00Owens Corning VentSure Sky Runner LTE is a 12 in x 30 ft rolled ridge vent for asphalt-shingle roof ventilation systems. It is for contractors balancing attic exhaust at the ridge with adequate soffit intake and the correct ventilation slot.
Key Specs
- Model / MPN: 803182
- Brand: Owens Corning
- Type: Rolled ridge vent
- Size: 12 in x 30 ft
- Color: Black
- Vent style: Staggered flat external baffle
- Install role: Exhaust ventilation at roof ridge
- Sell unit: Roll
Coverage & How Much You Need
One roll provides 30 linear ft of ridge vent before end cuts and layout waste. Calculate ridge length and ventilation requirement before ordering.
- Measure required linear footage from the takeoff.
- Add waste for cut ends, overlaps, and layout constraints.
Compatibility / Fitment
Use as a ridge exhaust vent under compatible hip-and-ridge shingles. Do NOT install without required intake ventilation, without the proper ridge slot, or as a substitute for static box vents where the roof design calls for another ventilation method.
FAQs
How many linear feet does one roll cover?
One roll covers 30 linear ft before cuts and waste. Measure the vented ridge length, then confirm the net free vent area calculation and intake balance.
How wide is the vent?
The candidate record lists a 12 in x 30 ft roll. Center it over the prepared ridge slot according to the Owens Corning installation instructions.
What slot is required at the ridge?
Owens Corning ridge vent instructions describe cutting slots on each side of the ridge and leaving uncut space near rake edges. The exact slot depends on roof framing and the product instructions.
Do I still need soffit intake vents?
Yes. Ridge exhaust only works correctly with balanced intake. Owens Corning instructions emphasize that soffit intake net free area should be at least equal to ridge exhaust area.
Are nails included?
Not specified by the manufacturer in the candidate record. Check the box contents for the exact roll or ask the Pro Desk before ordering if fasteners are required on the same purchase order.
Cutting ridge slots and installing ridge vents is fall-hazard roof work. Wear eye protection when cutting sheathing and follow roof fall-protection practices.
Product Expert Notes
A solid ventilation SKU because the buyer needs linear-foot coverage, ridge-slot guidance, and intake/exhaust balance. The FAQ should stop bad installs, not just repeat “easy roll out.”
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
