Skip to content
Oatey Galvanized No-Calk Roof Flashing 1-1/4 - 1-1/2 in. Pipe, 9 x 12-1/2 in. Base
Regular price $12.95Orders start at $399 — combine any items to reach the minimum. Learn more
Oatey Galvanized No-Calk Roof Flashing 1-1/4 - 1-1/2 in. Pipe, 9 x 12-1/2 in. Base
Oatey Galvanized No-Calk Roof Flashing seals plumbing vent pipe penetrations in commercial and residential roofs. This 1-1/4 in. to 1-1/2 in. pipe size has a 28-gauge, 9 in. x 12-1/2 in. galvanized steel base. The self-sealing collar slides over the pipe and requires no caulking; one flashing per pack.
Key Features:
- No-caulk design: Self-sealing collar slides over the pipe and requires no caulking.
- Galvanized steel base: 28-gauge galvanized steel base for durability.
- Wide pitch range: Suitable for roof pitch from 0 to 40 degrees.
- Heat rated: Rated 180 degrees F continuous heat.
- Type B approved: Approved for Type B installations.
- Trusted brand: Oatey products have earned the trust of plumbing professionals for over 100 years.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Oatey |
| Sell unit | 1 piece |
| Product line | No-Calk Roof Flashings |
| Available colors | Mill |
| Available sizes | 1-1/4 in. - 1-1/2 in. pipe, 9 in. x 12-1/2 in. base |
| Material | Galvanized steel |
| Dimensions | 9 in. x 12-1/2 in. base |
| Thickness | 28 ga base |
| Roof pitch range | 0-40 degrees |
| Heat rating | 180 degrees F continuous |
| Approvals | Approved for Type B installations |
| Intended use | Watertight seal for roof penetrations around plumbing vent pipes, commercial and residential |
Fit and Compatibility:
Fits 1-1/4 in. to 1-1/2 in. plumbing vent pipes. Approved for Type B installations; confirm the pipe type and roof covering before ordering. Caulking, sealants and additional flashing materials are sold separately.
Frequently Asked Questions (FAQ):
Q: What pipe sizes does it fit?
A: The self-sealing collar fits 1-1/4 in. to 1-1/2 in. vent pipes.
Q: Does it need caulking?
A: No, the self-sealing collar slides over the pipe and requires no caulking.
Q: What roof pitches does it handle?
A: It is designed for roof pitch from 0 to 40 degrees.
Q: What are the base dimensions?
A: The galvanized steel base is 9 in. x 12-1/2 in. and 28 gauge.
Q: Is it rated for hot applications?
A: It is rated for 180 degrees F continuous heat and approved for Type B installations.
Q: Can it be used on flat and steep roofs?
A: Yes, within the 0 to 40 degree pitch range it covers both low-slope and steep-slope applications.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
No-Calk flashings speed up vent penetrations because the collar seals itself and the flexible base conforms to roof pitch up to 40 degrees. Size the collar to your pipe diameter, and make sure the upper base edge tucks under the shingle course above so water sheds over the flange. The 180 degree F continuous heat rating makes this the pick for Type B vent installations where standard rubber collars are not permitted.
Verify local code requirements for vent pipe flashing, especially Type B installations, before ordering and installing.
Order the Oatey Galvanized No-Calk Roof Flashing for a watertight, caulk-free vent penetration seal.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
