Skip to content
NorWesCo G-Style Roof Edge Flashing 1-3/8 in. 26 Ga Galvanized Steel 10 ft. Length, Dark Brown or Gray
Regular price $9.20Orders start at $399 — combine any items to reach the minimum. Learn more
NorWesCo G-Style Roof Edge Flashing 1-3/8 in. 26 Ga Galvanized Steel 10 ft. Length, Dark Brown or Gray
This Norwesco G-style roof edge flashing is a 10 ft. drip edge length in 26 ga galvanized steel, available in Dark Brown or Gray. Each sell unit is a single 10 ft. piece, with master pack quantities of 20 pieces. It installs along the roof eave to direct water off the edge and pairs with underlayment and shingle starter courses.
Key Features:
- G-style profile: The G-style edge profile fits along the roof edge to shed water clear of the eave and fascia.
- 26 gauge steel: Formed from 26 ga galvanized steel for strength and durability along the roof edge.
- 10 ft. lengths: Long 10 ft. lengths mean fewer laps per eave run compared with shorter drip edge pieces.
- Galvanized finish: Galvanized construction resists corrosion in exterior roof applications.
- Two color choices: Offered in Dark Brown and Gray to coordinate with common shingle and trim colors.
- Contractor packs: Supplied in pack quantities of 20 pieces for full-roof material planning.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Norwesco |
| Sell unit | 1 piece, 10 ft. |
| Product line | G-Style Roof Edge Flashing |
| Material | Galvanized steel |
| Finish / texture | Galvanized; available in Dark Brown or Gray |
| Available colors | Dark Brown, Gray |
| Available sizes | 1-3/8 in. 26 GA |
| Length | 10 ft. |
| Wire gauge | 26 ga |
| Pack quantity | 20 pieces per pack |
| Intended use | Drip edge / metal edging at roof eaves |
| Coverage per unit | 10 linear ft. of roof edge per piece |
Coverage & How Much You Need:
One piece covers 10 linear ft. of roof edge. Measure total eave and rake length and add a waste allowance for laps and corner cuts, then divide by 10 ft. per piece.
Fit and Compatibility:
Designed for standard shingle roof edge applications and pairs with underlayment and asphalt or composite shingle systems. Fasteners and outside corner treatments are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included with one order?
A: One order is a single 10 ft. piece of G-style edge flashing in your chosen color; full packs are 20 pieces.
Q: How many pieces do I need for my roof?
A: Measure the total eave and rake linear footage and divide by 10 ft., adding extra for laps and cuts.
Q: What material is this flashing made of?
A: It is 26 ga galvanized steel, so it holds up well against corrosion in exterior roof service.
Q: What colors does it come in?
A: This line is offered in Dark Brown and Gray.
Q: How is it installed?
A: It is installed along the roof edge over the underlayment at the eave, then fastened before shingles are applied.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
G-style drip edge is a dependable eave detail for shingle roofs: set it over the underlayment at the eaves and under the underlayment on rakes where the detail calls for it. The 10 ft. length keeps laps to a minimum on long eave runs, reducing places where wind-driven water can work in. Choose Dark Brown or Gray based on your fascia and shingle palette; 26 ga galvanized is a solid standard gauge for residential edge metal.
Roof edge work involves ladder and fall hazards and cut metal edges are sharp; use appropriate fall protection, gloves, and eye protection.
Order Norwesco G-Style Galvanized Roof Edge Flashing in Dark Brown or Gray for a clean, durable roof edge.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
