Skip to content
Mule-Hide TPO Non-Reinforced Flashing, 12 in. x 50 ft. Roll, Gray or Tan
Regular price $344.50Orders start at $399 — combine any items to reach the minimum. Learn more
Mule-Hide TPO Non-Reinforced Flashing, 12 in. x 50 ft. Roll, Gray or Tan
Mule-Hide TPO Non-Reinforced Flashing is a 12-inch by 50-foot roll of flexible TPO flashing used to form custom flashings at walls, curbs and penetrations on TPO roofs. One roll is the sell unit, available in Gray or Tan. It pairs with Mule-Hide TPO membrane systems and accessories.
Key Features:
- Field-formable: Non-reinforced TPO sheet forms easily around corners, curbs and irregular penetrations.
- 12 in. width: The 12-inch width suits standard parapet and base flashing details.
- 50 ft. length: Each roll provides 50 linear feet of flashing.
- Two colors: Available in Gray or Tan to match the field membrane.
- Weldable TPO: Hot-air welds to compatible TPO membranes and accessories.
- Mule-Hide system: Part of the Mule-Hide TPO single-ply accessory line.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Mule-Hide Products |
| Sell unit | 1 roll, 12 in. x 50 ft. |
| Product line | MuleHide Flashing TPO Non-Reinforced |
| Material | TPO (thermoplastic polyolefin) |
| Available colors | Gray, Tan |
| Available sizes | 12 in. x 50 ft. |
| Dimensions | 12 in. x 50 ft. per roll |
| Width | 12 in. |
| Length | 50 ft. |
| Reinforcement | Non-reinforced |
| Intended use | Custom flashing details on TPO single-ply roofs |
Coverage & How Much You Need:
One roll delivers 12 inches by 50 feet, or 50 square feet of flashing before laps and waste. Estimate by totaling curb, wall and penetration runs and adding material for cuts and corner forming.
Fit and Compatibility:
Designed to weld to Mule-Hide TPO membrane systems and compatible TPO accessories; bonding adhesives and primers are sold separately. Do not mix with PVC or other membrane chemistries.
Frequently Asked Questions (FAQ):
Q: What comes on one roll?
A: One roll of non-reinforced TPO flashing, 12 inches wide by 50 feet long, in your choice of Gray or Tan.
Q: How much flashing does one roll cover?
A: About 50 square feet before laps, corner forming and waste.
Q: How is it installed?
A: Form it in the field and hot-air weld it to the TPO membrane, typically over bonding adhesive sold separately.
Q: Which color should I order?
A: Choose Gray or Tan to match the color of the field membrane on the roof.
Q: Is adhesive included?
A: No, adhesives and primers are sold separately.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Non-reinforced flashing is the go-to material for inside and outside corners and odd-shaped penetrations because it stretches without stiff backing. Match the flashing color to the field membrane for appearance and consistent weld behavior. On tall parapets consider stepping up to a wider flashing roll to minimize horizontal seams.
Hot-air welding tools create burn and fire hazards; follow the equipment manufacturer's safety instructions and keep flame-free practice around the work area.
Order Mule-Hide TPO Non-Reinforced Flashing in 12 in. x 50 ft. rolls, in Gray or Tan, today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
