Skip to content
Mule-Hide F5 Self-Adhering Air & Vapor Barrier Roll, 39 in. x 100 ft., 3.25 Square
Regular price $475.53Mule-Hide F5 Self-Adhering Air & Vapor Barrier Roll, 39 in. x 100 ft., 3.25 Square
Mule-Hide F5 is a self-adhering air and vapor barrier sheet, 39 in. wide by 100 ft. long per roll, covering 3.25 squares. The rubberized asphalt membrane with a polypropylene facing seals walls and roof perimeters against air and moisture movement, sold one roll per unit.
Key Features:
- Self-adhering membrane: Rubberized asphalt backing adheres directly to the substrate without fasteners.
- Rubberized asphalt face: Combines rubberized asphalt with a polypropylene film for a tough weatherproof sheet.
- Large coverage: Each 39 in. x 100 ft. roll covers 3.25 squares.
- Air and vapor control: Designed as an air and vapor barrier to reduce uncontrolled air leakage.
- Continuous sheet: One 100 ft. roll means fewer laps and faster installation.
- Roofing-grade: Built for use in roofing and wall weatherproofing assemblies.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Mule-Hide |
| Sell unit | 1 roll, 39 in. x 100 ft. |
| Product line | MuleHide EHD Fasteners F5 Air & Vapor Barrier |
| Dimensions | 39 in. x 100 ft. |
| Material | Rubberized asphalt / polypropylene |
| Coverage per unit | 3.25 squares |
| Available sizes | 39 in. x 100 ft. |
| Intended use | Air and vapor barrier sheeting |
Coverage & How Much You Need:
One 39 in. x 100 ft. roll covers 3.25 squares (325 sq ft) at full width. Size the job by dividing the barrier area by 325 sq ft per roll and adding waste for laps and detailing.
Fit and Compatibility:
Use within Mule-Hide roofing and weatherproofing assemblies where an air and vapor barrier is specified. Primer, termination accessories and compatible flashing products are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one unit?
A: One roll of F5 air and vapor barrier measuring 39 in. wide by 100 ft. long.
Q: How much area does a roll cover?
A: Each roll covers 3.25 squares, about 325 square feet, before laps and waste.
Q: Is it self-adhering?
A: Yes, the rubberized asphalt layer is self-adhering to the prepared substrate.
Q: What is the membrane made of?
A: It is a rubberized asphalt sheet with a polypropylene facing.
Q: Does it act as an air and vapor barrier?
A: Yes, it is designed to function as both an air and a vapor barrier.
Q: What preparation is required?
A: Surfaces should be clean, dry and primed where the manufacturer's installation instructions require a primer.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Self-adhering air and vapor barriers perform best when rolled firmly onto a clean, dry, primed substrate, working from the low end upward and shingling the laps in the direction of water flow. At 39 in. width a 100 ft. roll minimizes vertical seams on wall transitions. Plan cut widths for perimeter detailing so full-width sheets stay in the field of the wall.
Follow the manufacturer's installation instructions for substrate priming and temperature limits, and use fall protection when working on roof surfaces.
Order the Mule-Hide F5 39 in. x 100 ft. self-adhering air and vapor barrier roll for your next roofing or wall project.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
