Marathon SE Series Adjustable Roof Paver Pedestals 1.125 in. to 8.5 in. Heights

Marathon Roofing Products SE Series adjustable pedestals support pavers and removable deck panels on rooftops, with six height ranges from 1.125 in. up to 8.5 in. to handle sloping surfaces. Adjustments are made from above with an Adjustment Key after flooring is installed, delivering precision alignment without lifting heavy pavers. Each sell unit is one pedestal.

Key Features:

• Six Height Ranges: Offered in six adjustment ranges from 1.125 in. to 8.5 in. to suit different slope and deck conditions.
• Adjust From Above: The Adjustment Key works from above once flooring is installed, guaranteeing precise alignment.
• Slope Compensation: Ideal for sloping surfaces, letting paver decks read level across the roof.
• Faster Install: Cuts installation time dramatically, resulting in lower labor costs.
• Improved Ventilation: Pedestal systems improve ventilation to prevent water and mold damage under the deck.
• Reduce Lifting Injuries: Reduces possible injuries from continuously lifting heavy pavers to achieve a level surface.
• Energy Benefits: Pedestal systems can help reduce energy consumption versus traditional paving builds.

Specifications Table:

Coverage & How Much You Need:

Pedestal count depends on paver or panel size and layout, typically one pedestal per paver corner; pedestals are shared at corners between adjacent units. Divide total deck area by your paver module to estimate pedestals needed per specified height range.

Fit and Compatibility:

SE Series pedestals support removable floor paneling and pavers in MRP Supports pedestal systems, and pair with Elevate SkyPaver composite paver systems where the build-up calls for adjustable supports. Pavers, panels and the Adjustment Key are sold separately; select the pedestal height range that matches your finished deck height and slope.

Frequently Asked Questions (FAQ):

Q: Which height range should I order?
A: Choose the range that brackets your finished deck height, from 1.125 in. to 1.5 in. up through 6.75 in. to 8.5 in., allowing for roof slope.

Q: How is height adjusted?
A: Adjustments are performed with an Adjustment Key applied from above once the flooring has been installed, ensuring precision alignment.

Q: How many pedestals per paver?
A: Typically one pedestal per paver corner, with corners shared between adjacent pavers; final counts depend on paver size and layout.

Q: Are these good for sloped roofs?
A: Yes, SE Series supports are described as the ideal solution when dealing with sloping surfaces.

Q: What are the benefits of a pedestal system?
A: They support removable floor panels, install quickly, improve ventilation to prevent water and mold damage, and can reduce energy consumption.

Q: Are pavers included?
A: No, only the pedestal is included; pavers, decking and the Adjustment Key are sold separately.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Measure the finished height at the lowest and highest points of your sloped deck and select a range whose midpoint covers both, since a single pedestal cannot span two ranges. Lay out the grid before setting pavers, then use the Adjustment Key from above to fine-level the deck without lifting units. For tight-height terraces, the 1.125 in. to 1.5 in. range suits minimal build-ups, while taller ranges add ventilation and can absorb significant slope.

Do not exceed the pedestal's intended height range and follow the manufacturer's layout requirements to keep the deck stable under foot traffic.

Order Marathon SE Series adjustable pedestals in the height range your rooftop deck needs.