Ultracolor Plus FA Ivory Grout, 10 lb

Premium, fast-setting, polymer-modified cement grout with fine aggregate for joints 1/16 in. to 3/4 in. DropEffect technology reduces surface absorption, helping repel water, dirt and grime. Formulated for color consistency and efflorescence-free performance with high stain resistance.

---

Key Features:

• Fast-Setting All-in-One: Ready for light traffic in hours and designed for a wide joint range (1/16"–3/4")
• Fine Aggregate Cleanability: FA blend packs joints smoothly and wipes up easily
• DropEffect Technology: Reduced surface absorption helps resist water and stains—sealer typically not required
• Color-Consistent, Efflorescence-Free: HCT polymer-modified formula minimizes common grout issues
• Indoor/Outdoor Versatility: Suitable for a broad array of tile and stone installations

---

Specifications Table:

Specification	Details
Product name	Ultracolor Plus FA
Brand	MAPEI
Color	Ivory (5039)
Package weight	10 lb
Technology	DropEffect water-repellent; High-Hydrated Cement Technology (HCT)
Aggregate type	Fine aggregate (FA)
Setting	Fast-setting
Grout type	Polymer-modified, cement-based
Joint width range	1/16 in. to 3/4 in. (1.5–19 mm)
Features	Color-consistent; efflorescence-free; stain-resistant; sealer typically not required
Environmental note	CO2 emissions fully offset over product life cycle (Zero)

---

Frequently Asked Questions (FAQ):

Q: What joint widths can this grout be used for?
A: It’s formulated for joints from 1/16 inch to 3/4 inch (1.5 to 19 mm).

---

Q: Does it require a separate sealer?
A: A sealer is typically not required due to DropEffect technology and low absorption.

---

Q: How quickly does it set?
A: It is a rapid-setting grout; under normal conditions it can be ready for light traffic in a few hours.

---

Q: Is it suitable for wet areas?
A: Yes, its reduced absorption and stain resistance make it suitable for wet and dry areas; follow MAPEI installation guidelines.

---

Q: What color is this variant?
A: Ivory (MAPEI color 5039).

---

A Luxe, Seamless Finish in Warm Ivory

Ultracolor Plus FA in Ivory bathes your tilework in a soft, sunlit warmth that elevates stone and ceramic alike. Its fine aggregate creates a refined, uniform joint that reads as custom and couture. Pair it with honed marble or matte porcelain to coax out subtle veining and texture. This is the quiet luxury detail that makes a room feel impeccably finished.

---

Choose Ultracolor Plus FA in Ivory for fast-setting, stain-resistant joints that complete your tile project with lasting elegance.