Manufacturer Varies by Location Cant Strip 2 In. x 2 In., 192 LF Bundle, Recycled Roofing Cant

This 2 in. x 2 in. cant strip is a beveled strip placed in the angle where a roof abuts a wall, preventing a sharp bend in the roofing membrane. Each bundle provides 192 linear feet of dimensionally stable strip containing 25% post-consumer recycled content, and it cuts easily with a knife. Pair it with base flashing at parapets and walls.

Key Features:

• Prevents Sharp Bends: The beveled profile fills the roof-to-wall angle so the roofing material avoids a sharp 90-degree bend.
• Dimensionally Stable: The strip is dimensionally stable for a consistent transition along the wall.
• Recycled Content: Contains 25% post-consumer recycled content and complies with EPA Regulation 40 CFR Part 248.
• Easy to Cut: Cuts with a knife for fast fitting around corners and obstructions.
• 192 LF Bundle: One bundle provides 192 linear feet of cant strip.
• 2x2 Profile: The 2 in. x 2 in. cross-section suits standard cant details at walls and curbs.

Specifications Table:

Coverage & How Much You Need:

One bundle covers 192 linear feet of roof-to-wall junction. Measure the total footage of walls, parapets and curbs requiring a cant and divide by 192 to size the order.

Fit and Compatibility:

Use at roof-to-wall intersections under base flashing in built-up, modified bitumen or other low-slope membrane systems. Membrane, flashing and adhesives are sold separately; confirm the cant profile matches your roofing system detail.

Frequently Asked Questions (FAQ):

Q: What is included in one order unit?
A: One bundle (BD) containing 192 linear feet of 2 in. x 2 in. cant strip.

Q: What does a cant strip do?
A: It fills the 90-degree angle where a roof meets a wall so the roofing membrane transitions over a beveled surface instead of a sharp bend.

Q: How many bundles do I need?
A: Measure the linear footage of all roof-to-wall transitions and divide by 192 linear feet per bundle.

Q: How is it cut and installed?
A: It cuts easily with a knife and is placed in the roof/wall angle before the membrane and flashing are applied.

Q: Is it an environmentally friendly product?
A: Yes, it contains 25% post-consumer recycled content and complies with EPA Regulation 40 CFR Part 248.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Never force a membrane around a hard 90-degree corner — a 2x2 cant strip at every wall, parapet and curb transition extends membrane life and reduces Stress at the field-flash. Because it cuts with a knife, fit pieces tightly around corners and curbs without special tools. Order by total wall footage and add a little extra for curb wraps and off-cuts.

Use a sharp knife with a cut-resistant glove and cut on a stable surface away from foot traffic.

Add this 2 in. x 2 in. cant strip to your cart for a smooth, membrane-friendly roof-to-wall transition.