Malarkey #140 Recycled Rubber Walk Pad, 1/2 in. x 36 in. x 48 in.

This is the Malarkey #140 walk pad, a 1/2 in. thick recycled rubber mat measuring 36 in. x 48 in. that protects single-ply and other roof membranes from foot traffic and ladder or equipment loads. One pad is included per order, sold each. Use it along service paths and at rooftop equipment to guard the membrane surface.

Key Features:

• Membrane protection: Provides a durable rubber surface that shields the roofing membrane from foot traffic and dropped tools.
• Recycled rubber: Manufactured from recycled rubber for a tough, long-wearing walkway surface.
• Substantial thickness: The 1/2 in. pad thickness adds cushioning underfoot compared with thinner walkway rolls.
• Job-site sized: The 36 in. x 48 in. dimensions give a generous landing area at ladders and equipment.
• Works with walkway rolls: Pads can be placed at concentrated traffic points alongside continuous walkway rolls.

Specifications Table:

Coverage & How Much You Need:

One pad covers 12 square feet (36 in. x 48 in.). Place pads at ladder landings, rooftop equipment access points, or in a row to build a protected walking path; order enough pads to span the route end to end.

Fit and Compatibility:

Designed as an accessory for roofing systems, including single-ply membrane roofs where walkway protection is required. It is a standalone pad and does not require a mounting system; compatible Malarkey walkway rolls are available separately.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One Malarkey #140 recycled rubber walk pad, 1/2 in. x 36 in. x 48 in., sold individually.

Q: How much area does one pad cover?
A: Each pad covers 12 square feet of roof surface.

Q: Do the pads need to be fastened down?
A: The sources do not specify an attachment method; many walk pads are laid in place or adhered per the roofing manufacturer's instructions, so follow the membrane manufacturer's guidance.

Q: What are the pads made of?
A: Recycled rubber, 1/2 in. thick.

Q: Can they be used on any roof membrane?
A: They are sold as general roof crossover walkway protection; confirm compatibility with your specific membrane type before installation.

Q: How many pads do I need for a walkway?
A: Measure your walking route length and divide by 48 in. (4 ft) per pad, allowing pads to butt or slightly overlap along the path.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Walk pads are one of the least expensive ways to extend membrane life on high-traffic roofs. Position them at ladder bases, around HVAC units, and along the route technicians actually take, not just the shortest path. At 1/2 in. thick, the #140 pad gives more cushion and puncture protection than thin roll goods, making it a good choice at concentrated load points.

Verify that pad placement does not block drainage or create a trip edge, and follow the roofing manufacturer's instructions before adhering pads to the membrane.

Order the Malarkey #140 recycled rubber walk pad to protect your roof's highest-traffic areas.