
Lignapal Walnut 1mm Wood Veneer Sheet, 48 in. x 120 in. with Phenolic Backer
Regular price $477.80Lignapal Walnut 1mm Wood Veneer Sheet, 48 in. x 120 in. with Phenolic Backer
Lignapal Walnut is a genuine walnut wood veneer sheet reinforced with a synthetic phenolic backer and sealed with a water-based lacquer topcoat. Each unit is one 1mm sheet veneer measuring 48 in. by 120 in. It installs like standard laminate and pairs with matching 1mm ABS and 1.5mm wood edgeband.
Key Features:
- Real walnut surface: The face is true walnut wood veneer with natural grain and character.
- Phenolic backer: A phenolic resin backer makes the sheet as easy to apply as standard laminate.
- Curtain-coat lacquer: The unique curtain coat lacquering process highlights the wood's warmth and natural luster.
- Eco-friendly finish: The topcoat is an eco-friendly water-based finish applied under controlled conditions.
- Project-wide color match: Each veneer batch is stain-tuned for consistency across the whole project.
- Generous sheet size: The 48 in. x 120 in. sheet covers about 40 square feet per unit.
- Matching edge options: Matching 1mm ABS and 1.5mm wood edgeband are available in this design.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lignapal |
| Sell unit | 1 sheet |
| Design name | Walnut |
| Material | Real wood veneer with phenolic resin backer |
| Color / finish | Walnut with water-based lacquer topcoat |
| Available finishes | 1mm Sheet Veneer |
| Available sheet sizes | 48 in. x 120 in. |
| Thickness | 1mm veneer |
| Nominal size | 48 in. x 120 in. |
| Surface / pattern | Walnut wood grain |
| Recommended use | Interior surfaces applied like standard laminate |
| Coverage per unit | 40 sq. ft. per sheet |
Coverage & How Much You Need:
One 48 in. x 120 in. sheet provides 40 square feet of veneer before trim waste. For face-frame and panel work, plan parts along the grain and add roughly 10 to 15 percent for cutting and matching.
Fit and Compatibility:
Applies with contact adhesive to particleboard, MDF or plywood substrates exactly like high-pressure laminate. Use the separately sold matching 1mm ABS or 1.5mm wood edgeband to finish exposed edges.
Frequently Asked Questions (FAQ):
Q: What is included in the sell unit?
A: One 1mm Walnut sheet veneer, 48 in. x 120 in., with phenolic backer and factory lacquer topcoat.
Q: Is the finish ready to use as-is?
A: Yes, the sheet arrives with a cured water-based lacquer topcoat, so no site finishing is required.
Q: How is it attached?
A: Bond it like standard laminate using contact adhesive on both surfaces, then roll or press firmly.
Q: Which substrate is recommended?
A: Stable particleboard or MDF core with a balancing backer sheet on the reverse side gives the flattest result.
Q: Do matching edges exist?
A: Yes, matching 1mm ABS and 1.5mm wood edgeband are offered and sold separately.
Q: What is the sheet size?
A: One sheet is 48 inches by 120 inches, approximately 40 square feet.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
This is the workhorse of the Lignapal walnut range: a straight walnut grain that sequences cleanly across cabinet runs and casegoods. Bond over a well-acclimated substrate with contact adhesive and balance every panel. For doors and exposed ends, order the 1.5mm wood edgeband in the same design so edges and faces share one grain story.
Cut veneer with sharp fine-tooth blades and wear eye protection; sanding dust from wood and resin backers requires adequate ventilation.
Buy the Lignapal Walnut 1mm sheet veneer for a ready-to-bond real wood surface with laminate convenience.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.