Skip to content
Lignapal Smoked Walnut 1mm Wood Veneer Sheet, 48 in. x 120 in. with Phenolic Backer
Regular price $371.12Orders start at $399 — combine any items to reach the minimum. Learn more
Lignapal Smoked Walnut 1mm Wood Veneer Sheet, 48 in. x 120 in. with Phenolic Backer
This is Lignapal Smoked Walnut, a real wood veneer sheet reinforced with a phenolic resin backer and finished with a water-based lacquer topcoat. Each sell unit is one 1mm sheet veneer measuring 48 in. wide by 120 in. long. It applies like standard laminate and pairs with matching 1mm ABS and 1.5mm wood edgeband.
Key Features:
- Real wood face: The surface is genuine Smoked Walnut wood veneer, not a printed laminate.
- Phenolic backer: A synthetic phenolic resin backer lets the sheet be applied the same way as standard high-pressure laminate.
- Lacquer topcoat: A curtain-coat lacquering process brings out the warmth and natural luster of the wood.
- Water-based finish: The eco-friendly water-based finish is applied under highly controlled conditions.
- Batch color matching: Staining of each veneer batch is tuned for consistency across an entire project.
- Large sheet size: One sheet measures 48 in. x 120 in., giving 40 square feet of coverage before trimming.
- Matching edges: The design is available with matching 1mm ABS edgeband and 1.5mm wood edgeband.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lignapal |
| Sell unit | 1 sheet |
| Design name | Smoked Walnut |
| Material | Real wood veneer with phenolic resin backer |
| Color / finish | Smoked Walnut with water-based lacquer topcoat |
| Available finishes | 1mm Sheet Veneer |
| Available sheet sizes | 48 in. x 120 in. |
| Thickness | 1mm veneer |
| Nominal size | 48 in. x 120 in. |
| Surface / pattern | Smoked Walnut wood grain |
| Recommended use | Interior surfaces applied like standard laminate |
| Coverage per unit | 40 sq. ft. per sheet |
Coverage & How Much You Need:
One 48 in. x 120 in. sheet covers 40 square feet of flat surface before trim waste. Plan seams around the sheet dimensions and allow extra material for grain matching at butt joints.
Fit and Compatibility:
The phenolic backer bonds with standard contact adhesive to particleboard, MDF or plywood substrates, same as high-pressure laminate. Pair with matching 1mm ABS or 1.5mm wood edgeband sold separately to finish exposed panel edges.
Frequently Asked Questions (FAQ):
Q: What is included with one order?
A: One 1mm Smoked Walnut sheet veneer, 48 in. x 120 in., with phenolic backer and factory lacquer topcoat.
Q: How do I apply this veneer?
A: It applies like standard laminate: roll contact adhesive onto both the backer and substrate, then bond and roll the sheet flat.
Q: What substrate should I use?
A: A stable particleboard, MDF or plywood core works well; use a laminate backer sheet on the opposite face to prevent warping.
Q: Will the color match across multiple sheets?
A: Batch staining is tuned under controlled conditions to keep color consistent throughout a project, but order all sheets for one job together.
Q: How do I finish the edges?
A: Matching 1mm ABS and 1.5mm wood edgeband are available in this design and are sold separately.
Q: Can I cut it to size?
A: Yes, score and snap or cut with a laminate slitter or table saw with a fine-tooth blade, cutting face up to avoid chipping.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
As a fabricator, I treat Lignapal like HPL: glue with contact adhesive over a stable, properly acclimated substrate and balance every panel with a backer sheet. Let sheets acclimate 48 hours in the shop before bonding, and keep seams away from sink and cooktop cutouts. For exposed edges, order the matching 1.5mm wood edgeband so the grain reads continuously around the part.
Wear eye protection and a dust mask when cutting wood veneer sheets, and use sharp fine-tooth blades to reduce chipping and kickback.
Order the Lignapal Smoked Walnut 1mm sheet veneer today for a genuine wood surface that installs like laminate.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
