Lignapal Oak Rift Wood Veneer Sheet 48 in. x 120 in. 1mm Pre-Finished

Lignapal Oak Rift is a real rift-cut oak veneer sheet with a phenolic resin backer, pre-finished with a water-based lacquer topcoat. Each sheet measures 48 in. x 120 in. in the 1mm sheet veneer grade. It applies with standard laminate contact adhesive and pairs with matching ABS or wood edgeband for a complete job.

Key Features:

• Real rift oak: Oak Rift is a genuine wood veneer design in a rift-cut oak pattern.
• Laminate-style backer: A phenolic backer makes the sheet apply as easily as standard high-pressure laminate using contact adhesive.
• Pre-finished surface: The curtain coat lacquering process provides a factory topcoat that brings out the warmth and natural luster of the wood.
• Eco-friendly finish: The lacquer topcoat is water-based and applied in a controlled, eco-friendly process.
• Batch-matched color: Each veneer batch is stained to a controlled standard for consistency across your entire project.
• Reinforced sheet: A synthetic resin backer reinforces the real wood face for handling and fabrication stability.
• Matching edges: The design is offered with matching 1mm ABS and 1.5mm wood edgeband sold separately.

Specifications Table:

Coverage & How Much You Need:

One 48 in. x 120 in. sheet covers 40 sq ft of surface. Plan layout to the 4 ft x 10 ft dimension and allow trimming margin before cutting.

Fit and Compatibility:

Apply to a flat, smooth substrate such as particleboard or MDF with contact adhesive, as with standard laminate. Matching Lignapal 1mm ABS and 1.5mm wood edgeband are sold separately; finished panels and loose veneer options are also offered by the brand.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One pre-finished 1mm Oak Rift sheet veneer, 48 in. wide by 120 in. long, with a phenolic resin backer. Edgeband and finished panels are sold separately.

Q: How much area does one sheet cover?
A: One sheet covers 40 square feet (48 in. x 120 in.) before trimming waste.

Q: How is it installed?
A: It bonds like standard laminate: apply contact adhesive to both the sheet backer and the substrate, then press with a roller. Use a balanced backer sheet on the opposite face to prevent warping.

Q: Is it real wood?
A: Yes, the face is a genuine rift-cut oak veneer, reinforced with a synthetic resin backer and finished with a water-based lacquer topcoat.

Q: What edge treatment should I use?
A: Match the design with 1mm ABS or 1.5mm wood edgeband from the same program, sold separately.

Q: Will the color match across a large project?
A: Batch staining is controlled so veneer stays consistent throughout a project, though you should still dry-fit panels before final bonding.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Treat this pre-finished veneer like a laminate layup: use a flat, well-sealed particleboard or MDF core and a balanced backer on the opposite face to prevent telegraphing and warp. Because the topcoat is factory lacquer, keep seams tight and hand-trim with a sharp knife to avoid chipping the finish. For a fully finished look, order the matching 1.5mm wood edgeband before starting the project.

Cut veneer edges and trimming blades are sharp; wear cut-resistant gloves and eye protection, and bond sheets in a well-ventilated area when using contact adhesive.

Order the Lignapal Oak Rift 1mm sheet veneer in 48 in. x 120 in. for a pre-finished real-oth oak surface that installs like laminate.