Skip to content
Lavi Industries 700 Series Brass 147 Degree Flush Elbow for 1-1/2 in or 2 in Tube, Polished
Regular price $29.17Orders start at $399 — combine any items to reach the minimum. Learn more
Lavi Industries 700 Series Brass 147 Degree Flush Elbow for 1-1/2 in or 2 in Tube, Polished
The Lavi Industries 700 Series 147 degree flush elbow produces a shallow angled bend between two rail tubes with a concealed, flush joint. It is polished brass, offered in 3-1/4 in L x 2-1/4 in W for 1-1/2 in tube or 3-3/4 in L x 2-3/4 in W for 2 in tube. The joint is made with primer and adhesive.
Key Features:
- Shallow angle: 147 degree angle suits gradual direction changes in a railing layout.
- Flush joint: Fits inside the tube ends so the connection stays hidden.
- Brass material: Machined brass fitting in the 700 Series flush line.
- Polished finish: Polished brass finish matching other 700 Series polished fittings.
- Two tube sizes: Offered for 1-1/2 in or 2 in round railing tube.
- Bonded assembly: Primer and adhesive create the permanent joint.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lavi Industries |
| Sell unit | 1 piece |
| Collection | 700 Series |
| Product type | 147 degree flush elbow railing fitting |
| Available finishes | Polished |
| Available sizes | 3-1/4 in L x 2-1/4 in W (for 1-1/2 in tube); 3-3/4 in L x 2-3/4 in W (for 2 in tube) |
| Material | Brass |
| Color / finish | Polished brass |
| Overall length / width / projection | 3-1/4 in L x 2-1/4 in W (1-1/2 in tube size); 3-3/4 in L x 2-3/4 in W (2 in tube size) |
| Tube size | Fits 1-1/2 in or 2 in round tube depending on variant |
| Mounting | Adhesive with primer (bonded joint inside the tube) |
| Angle | 147 degrees |
| Assembly | Bonded connection; primer and adhesive required |
Fit and Compatibility:
For Lavi Industries 700 Series railing in 1-1/2 in or 2 in round tube; select the variant for your tube. Pairs with 700 Series polished ball fittings and other flush elbows and tees.
Frequently Asked Questions (FAQ):
Q: What comes with the elbow?
A: One 147 degree flush elbow; primer and adhesive are the required installation method and are not listed as included.
Q: When would I use 147 degrees instead of 135?
A: The 147 degree angle makes a shallower bend, useful where the rail changes direction more gradually.
Q: Which size do I need?
A: The 3-1/4 in L x 2-1/4 in W fitting is for 1-1/2 in tube and the 3-3/4 in L x 2-3/4 in W fitting is for 2 in tube.
Q: How is the joint made?
A: The fitting bonds inside prepared tube ends using primer and adhesive for a concealed connection.
Q: Is the finish consistent?
A: It is polished brass, matching other 700 Series polished fittings.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Choose this 147 degree flush elbow when your rail layout calls for a subtle angle rather than a sharp 135 or 90 degree turn; measuring the actual site angle is worth the time because flush joints are permanent once bonded. Cut tube ends square, deburr, prime, then apply adhesive and insert the fitting in one motion. Confirm tube diameter before ordering since the 1-1/2 in and 2 in versions are separate items.
Use railing adhesives and primers only with adequate ventilation and per the adhesive maker's instructions.
Get the Lavi Industries 700 Series brass 147 degree flush elbow for smooth, hidden rail bends.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
