Skip to content
Lavi Industries 700 Series Brass 135 Degree Flush Elbow for 1-1/2 in or 2 in Tube, Polished
Regular price $28.12Orders start at $399 — combine any items to reach the minimum. Learn more
Lavi Industries 700 Series Brass 135 Degree Flush Elbow for 1-1/2 in or 2 in Tube, Polished
This Lavi Industries 700 Series 135 degree flush elbow joins two rail tubes at an angle with a low-profile, seamless joint. It is polished brass and comes in 3 in L x 2-5/16 in W for 1-1/2 in tube or 3-3/8 in L x 2-7/8 in W for 2 in tube. Installation uses adhesive and primer, which are applied to the tube ends.
Key Features:
- Flush profile: Flush-style fitting creates a nearly invisible joint between tube sections.
- Angled turn: Forms a 135 degree change of direction in a railing run.
- Brass construction: Machined brass fitting from the 700 Series flush fitting family.
- Polished finish: Polished brass finish to match other 700 Series polished components.
- Two tube sizes: Sized for 1-1/2 in or 2 in round railing tube.
- Adhesive install: Joined inside the tube using adhesive with primer for a concealed connection.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lavi Industries |
| Sell unit | 1 piece |
| Collection | 700 Series |
| Product type | 135 degree flush elbow railing fitting |
| Available finishes | Polished |
| Available sizes | 3 in L x 2-5/16 in W (for 1-1/2 in tube); 3-3/8 in L x 2-7/8 in W (for 2 in tube) |
| Material | Brass |
| Color / finish | Polished brass |
| Overall length / width / projection | 3 in L x 2-5/16 in W (1-1/2 in tube size); 3-3/8 in L x 2-7/8 in W (2 in tube size) |
| Tube size | Fits 1-1/2 in or 2 in round tube depending on variant |
| Mounting | Adhesive with primer (bonded joint inside the tube) |
| Angle | 135 degrees |
| Assembly | Bonded connection; primer and adhesive required |
Fit and Compatibility:
Designed for Lavi Industries 700 Series rail runs in 1-1/2 in or 2 in round tube; choose the size matching your tube diameter. Complements 700 Series polished ball fittings and other flush fittings in the same finish.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 135 degree flush elbow; adhesive and primer are the installation method and are not listed as included.
Q: Which size fits my rail?
A: The 3 in L x 2-5/16 in W elbow suits 1-1/2 in tube and the 3-3/8 in L x 2-7/8 in W elbow suits 2 in tube.
Q: How is it installed?
A: It is a flush fitting that bonds to the prepared tube ends with primer and adhesive, leaving a seamless joint.
Q: Why choose flush over ball style?
A: Flush elbows hide the joint inside the tube for a cleaner look, while ball fittings sit on the outside and screw on.
Q: Will it match my other fittings?
A: Polished brass is the shared finish across the 700 Series, so fittings from that series will coordinate.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Flush elbows give the cleanest angled joint in a tubular rail, but they depend on a proper bonded connection: cut the tube ends square, clean and prime them, and use the adhesive system specified for the fitting. Measure the angle of your turn carefully, since flush joints cannot be repositioned once the adhesive cures. Confirm tube diameter before ordering because the two sizes are not interchangeable.
Handle and apply railing adhesives and primers in a ventilated area and follow the adhesive manufacturer's safety instructions.
Choose the Lavi Industries 700 Series brass 135 degree flush elbow for seamless angled rail joints.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
