Skip to content
Lavi Industries 700 Series Ball Side Outlet Tee, Stainless Steel, Polished, 3-Way Rail Connector for 1-1/2 in or 2 in Tube
Regular price $33.85Orders start at $399 — combine any items to reach the minimum. Learn more
Lavi Industries 700 Series Ball Side Outlet Tee, Stainless Steel, Polished, 3-Way Rail Connector for 1-1/2 in or 2 in Tube
This Lavi Industries 700 Series ball side outlet tee connects two collinear rail runs plus a side outlet at 90 degrees through a polished stainless ball. It is sized for 1-1/2 in or 2 in tube. Each fitting includes self-drilling, self-tapping hardware and installs without welding.
Key Features:
- 3-Way Junction: Joins two inline tube runs with a side outlet exiting at 90 degrees.
- Ball Styling: Spherical fitting design consistent with the 700 Series ball fitting family.
- Stainless Steel: Made of stainless steel in a polished finish.
- Screw Installation: Attaches with self-drilling, self-tapping hardware included with the fitting.
- Two Tube Sizes: Offered in 2-1/2 in Dia x 2-3/4 in H for 1-1/2 in tube and 3-1/4 in Dia x 3-3/8 in H for 2 in tube.
- No Welding: Self-drilling fasteners allow on-site assembly without special fabrication.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lavi Industries |
| Sell unit | 1 piece (self-drilling, self-tapping hardware included) |
| Collection | 700 Series |
| Product type | Ball side outlet tee, 3-way railing fitting |
| Available finishes | Polished |
| Available sizes | 3-1/4 in Dia x 3-3/8 in H (for 2 in tube); 2-1/2 in Dia x 2-3/4 in H (for 1-1/2 in tube) |
| Material | Stainless steel |
| Tube size | 1-1/2 in or 2 in round tube depending on variant |
| Installation | Self-drilling, self-tapping screws |
| Included hardware | Self-drilling, self-tapping hardware |
Fit and Compatibility:
Designed for Lavi 700 Series round tubing in 1-1/2 in or 2 in diameter; match the fitting size to the tube. Pairs with other 700 Series ball fittings in the same polished finish.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One ball side outlet tee with self-drilling, self-tapping installation hardware.
Q: How does this differ from a ball tee?
A: Both are 3-way fittings; the side outlet tee is used where the third tube exits from the side, such as a post rising from a rail run.
Q: Which size fits my tube?
A: The 3-1/4 in Dia x 3-3/8 in H fitting is for 2 in tube and the 2-1/2 in Dia x 2-3/4 in H fitting is for 1-1/2 in tube.
Q: Is a satin version available?
A: No, this line is listed in polished stainless only.
Q: Is welding required?
A: No, the fitting uses self-drilling, self-tapping screws.
Q: Can it be used outdoors?
A: It is stainless steel, but the sources do not state specific outdoor or environmental ratings.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use the side outlet tee where a vertical member meets a continuous rail run and you want the ball aesthetic. Because both the inline and side tubes must seat in the ball, check alignment in both planes before final tightening. Keep all fittings in the same polished finish for a uniform installation.
Railing fittings are structural components; confirm the completed assembly meets local building code load requirements before use.
Order the Lavi Industries 700 Series ball side outlet tee for a polished three-way railing junction.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
