Skip to content
Lavi Industries 700 Series Ball Elbow, Stainless Steel, Satin or Polished, 90 Degree Rail Corner for 1-1/2 in or 2 in Tube
Regular price $30.42Orders start at $399 — combine any items to reach the minimum. Learn more
Lavi Industries 700 Series Ball Elbow, Stainless Steel, Satin or Polished, 90 Degree Rail Corner for 1-1/2 in or 2 in Tube
The Lavi Industries 700 Series ball elbow turns a railing run 90 degrees through a spherical stainless fitting. It is offered in satin or polished stainless for 1-1/2 in or 2 in tube. Each order includes 1 fitting with two #8 x 5/8 in Phillips pan head self-drilling screws for screw-on installation.
Key Features:
- 90 Degree Turn: Joins two tube runs at a right angle through a ball-shaped fitting.
- Screws Included: Comes with two #8 x 5/8 in Phillips pan head self-drilling screws.
- No Welding: Self-drilling screw installation means the fitting can be attached on site without welding.
- Stainless Steel: Made of stainless steel for durable railing use.
- Satin or Polished: Available in satin for the 2 in tube version and polished for both tube sizes.
- 700 Series Styling: Coordinates with the spherical look of other 700 Series ball fittings.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lavi Industries |
| Sell unit | 1 piece (2 self-drilling screws included) |
| Collection | 700 Series |
| Product type | Ball elbow, 90 degree railing fitting |
| Available finishes | Polished, Satin |
| Available sizes | 3-1/4 in Dia x 3-3/8 in H (for 2 in tube, satin or polished); 2-1/2 in Dia x 2-3/4 in H (for 1-1/2 in tube, polished) |
| Material | Stainless steel |
| Tube size | 1-1/2 in or 2 in round tube depending on variant |
| Installation | Self-drilling screws |
| Included hardware | (2) #8 x 5/8 in Phillips pan head self-drilling screws |
Fit and Compatibility:
Fits Lavi 700 Series round tubing; use the 3-1/4 in ball with 2 in tube and the 2-1/2 in ball with 1-1/2 in tube. Combines with other 700 Series ball fittings such as tees, crosses and side outlet tees in matching finishes.
Frequently Asked Questions (FAQ):
Q: What is included with the fitting?
A: One ball elbow plus two #8 x 5/8 in Phillips pan head self-drilling screws.
Q: Which size do I need?
A: The 3-1/4 in Dia x 3-3/8 in H elbow fits 2 in tube; the 2-1/2 in Dia x 2-3/4 in H elbow fits 1-1/2 in tube.
Q: Which finishes are offered?
A: Polished in both tube sizes, and satin in the 3-1/4 in size for 2 in tube.
Q: How is it installed?
A: Drive the included self-drilling screws through the fitting into the tube; no welding is needed.
Q: Can I mix ball and flush fittings on one rail?
A: Both belong to the 700 Series and share tube sizes, but choose one fitting style per rail for a consistent appearance.
Q: Are more screws available if needed?
A: The sources only state the two included screws; replacement hardware would need to be sourced separately.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
A ball elbow gives a visible, decorative corner treatment compared with a flush elbow, so choose it when the spherical look is part of the design. Match tube diameter first, then finish, since satin is only listed in the 2 in tube size. Dry-assemble the corner before final tightening so both rails seat fully into the ball.
Verify the finished railing assembly meets local building code load and guardrail requirements before use.
Choose the Lavi Industries 700 Series ball elbow for a polished spherical 90 degree corner on your rail.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
