Skip to content
Lavi Industries 700 Series 90 deg Flush Side Outlet Elbow, Polished Brass Railing Fitting for 1-1/2 in or 2 in Tube
Regular price $28.12Orders start at $399 — combine any items to reach the minimum. Learn more
Lavi Industries 700 Series 90 deg Flush Side Outlet Elbow, Polished Brass Railing Fitting for 1-1/2 in or 2 in Tube
This Lavi Industries 700 Series 90 deg flush side outlet elbow joins two railing runs at a right angle while providing a side outlet for a third leg, such as a post or lower rail. It is cast in brass with a polished finish in versions for 1-1/2 in or 2 in tube. Installed with Lido Weld adhesive and self-drilling, self-tapping hardware.
Key Features:
- Corner with outlet: Combines a 90 degree corner with a side outlet for an intersecting tube leg.
- Solid brass body: Brass construction with 0.05 in material thickness.
- Polished finish: Polished brass finish for decorative railing systems.
- Two tube sizes: Available as 2-1/4 in W x 2-1/4 in H for 1-1/2 in tube and 2-1/2 in W x 2-1/2 in H for 2 in tube.
- Adhesive system: Uses Lido Weld adhesive with self-drilling, self-tapping hardware included.
- Flush appearance: Flush design keeps the rail surface smooth through the joint.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lavi Industries |
| Sell unit | 1 piece |
| Collection | 700 Series |
| Product type | 90 degree flush side outlet elbow railing fitting |
| Available finishes | Polished |
| Available sizes | 2-1/4 in W x 2-1/4 in H (for 1-1/2 in tube); 2-1/2 in W x 2-1/2 in H (for 2 in tube) |
| Material | Brass |
| Thickness | 0.05 in |
| Width | 2-1/4 in or 2-1/2 in depending on size |
| Height | 2-1/4 in or 2-1/2 in depending on size |
| Tube size | 1-1/2 in or 2 in |
| Mounting | Lido Weld adhesive with self-drilling, self-tapping hardware included |
Fit and Compatibility:
Intended for Lavi Industries 700 Series flush railing systems with 1-1/2 in or 2 in round tube. Adhesive is ordered separately; other 700 Series fittings share the same polished finish.
Frequently Asked Questions (FAQ):
Q: What does a side outlet elbow do?
A: It turns a rail 90 degrees and provides an additional side port, typically for a post, baluster or intersecting rail.
Q: What comes with the fitting?
A: One brass side outlet elbow with self-drilling, self-tapping hardware; Lido Weld adhesive is specified and sold separately.
Q: How do I pick the right size?
A: Use the 2-1/4 in version with 1-1/2 in tube and the 2-1/2 in version with 2 in tube.
Q: What is it made of?
A: Brass with a 0.05 in material thickness and a polished finish.
Q: Is the joint visible after installation?
A: The flush design keeps the connection smooth and continuous along the rail surfaces.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Side outlet elbows are useful at corner posts where a rail changes direction and a vertical or intersecting leg lands in the same node. Confirm which legs carry load in your layout before relying on the outlet port. Bond with the specified adhesive and drive the included self-drilling screws fully for a rigid joint.
Check that the assembled railing meets local guardrail and handrail code requirements before use.
Get the Lavi Industries 700 Series polished brass 90 deg flush side outlet elbow for three-way railing corners.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
