Skip to content
Lavi Industries 700 Series 90 deg Flush Elbow, Polished Brass Railing Fitting for 1-1/2 in or 2 in Tube
Regular price $23.96Orders start at $399 — combine any items to reach the minimum. Learn more
Lavi Industries 700 Series 90 deg Flush Elbow, Polished Brass Railing Fitting for 1-1/2 in or 2 in Tube
This Lavi Industries 700 Series 90 deg flush elbow turns a railing run through a right angle with a clean, flush corner. It is cast in brass with a polished finish and is sized for either 1-1/2 in or 2 in round tube. One fitting per order, installed with adhesive and primer.
Key Features:
- Right-angle corner: Forms a 90 degree direction change between two tube runs with a flush joint.
- Solid brass body: Brass construction gives the corner fitting strength and a premium look.
- Polished finish: Polished brass finish suits visible decorative railing applications.
- Two tube sizes: Offered in 2-1/4 in L x 2-1/4 in W for 1-1/2 in tube and 2-1/2 in L x 2-1/2 in W for 2 in tube.
- Adhesive and primer: Installed with adhesive and primer for a bonded, concealed joint.
- Coordinating series: Belongs to the 700 flush fitting family for consistent railing design.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lavi Industries |
| Sell unit | 1 piece |
| Collection | 700 Series |
| Product type | 90 degree flush elbow railing fitting |
| Available finishes | Polished |
| Available sizes | 2-1/4 in L x 2-1/4 in W (for 1-1/2 in tube); 2-1/2 in L x 2-1/2 in W (for 2 in tube) |
| Material | Brass |
| Length | 2-1/4 in or 2-1/2 in depending on size |
| Width | 2-1/4 in or 2-1/2 in depending on size |
| Tube size | 1-1/2 in or 2 in |
| Mounting | Adhesive with primer |
Fit and Compatibility:
Fits Lavi Industries 700 Series flush railing systems using 1-1/2 in or 2 in round tube. Adhesive, primer and tube are sold separately; pair with other 700 Series flush fittings in polished brass.
Frequently Asked Questions (FAQ):
Q: What comes in the box?
A: One brass 90 deg flush elbow; installation uses adhesive and primer, which are purchased separately.
Q: Which size do I need?
A: Choose the 2-1/4 in version for 1-1/2 in tube or the 2-1/2 in version for 2 in tube so the elbow matches your rail outside diameter.
Q: Where is a flush elbow used?
A: At inside and outside corners where a railing changes direction 90 degrees and you want a seamless, flush corner instead of an exposed connector.
Q: How is it secured?
A: The tube ends are bonded into the elbow with adhesive and primer per the manufacturer specification.
Q: Will it match my other fittings?
A: It shares the same polished brass finish and 700 Series design as the other flush fittings in the line.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
For crisp corners on level runs, the flush radius elbow gives a softer turn, while this square flush elbow delivers a true 90 degree corner. Cut tube ends square and clean before bonding, and dry-fit both legs first. Keep all corner fittings from the same series so the polished brass matches across the run.
Confirm that the finished railing meets local building code requirements for guard and handrail strength before use.
Add the Lavi Industries 700 Series polished brass 90 deg flush elbow for seamless railing corners.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
