Skip to content
Lavi Industries 500 Series Brass Wall Flange, Polished, 3 in or 4 in Dia, For 1-1/2 in or 2 in Tube
Regular price $17.19Orders start at $399 — combine any items to reach the minimum. Learn more
Lavi Industries 500 Series Brass Wall Flange, Polished, 3 in or 4 in Dia, For 1-1/2 in or 2 in Tube
This Lavi Industries 500 Series wall flange in polished brass attaches railing tube to a wall, in 4 in diameter by 1-1/4 in high for 2 in tube or 3 in diameter by 1-1/4 in high for 1-1/2 in tube. Screws are included and each order is 1 piece. Pair it with matching 500 Series polished fittings.
Key Features:
- Two size choices: Available as 4 in Dia x 1-1/4 in H for 2 in tube or 3 in Dia x 1-1/4 in H for 1-1/2 in tube.
- Polished brass: Solid brass construction with a polished finish for a bright, traditional look.
- Screws included: Includes (3) #12 x 2 in Phillips flat head screws and (1) #8 x 5/8 in Phillips pan head self-drilling screw.
- Self-drilling install: Installs with self-drilling screws, so no pre-drilled pilot holes are required in the specified application.
- Low profile height: The 1-1/4 in height keeps the flange close to the mounting surface.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Lavi Industries |
| Sell unit | 1 piece |
| Collection | 500 Series |
| Product type | Wall flange |
| Available finishes | Polished |
| Available sizes | 3 in Dia x 1-1/4 in H (for 1-1/2 in tube); 4 in Dia x 1-1/4 in H (for 2 in tube) |
| Overall length / width / projection | 4 in Dia x 1-1/4 in H (largest variant) |
| Material | Brass |
| Tube size | For 1-1/2 in or 2 in tube depending on size |
| Mounting | Self-drilling screw; includes (3) #12 x 2 in Phillips flat head screws and (1) #8 x 5/8 in Phillips pan head self-drilling screw |
Fit and Compatibility:
Use with Lavi Industries 500 Series railing tube: the 3 in flange suits 1-1/2 in tube and the 4 in flange suits 2 in tube. Tube, posts and other fittings are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One polished brass wall flange with (3) #12 x 2 in Phillips flat head screws and (1) #8 x 5/8 in Phillips pan head self-drilling screw. Tube is not included.
Q: Which flange fits my tube?
A: The 4 in diameter flange is for 2 in tube; the 3 in diameter flange is for 1-1/2 in tube.
Q: Do I need to pre-drill?
A: The installation type is self-drilling screw, and the pan head self-drilling screw is included; still confirm the wall material suits screw attachment.
Q: What finish is it?
A: Polished brass.
Q: How tall is the flange?
A: Both sizes are 1-1/4 in high.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Wall flanges are the standard way to end a rail run into a post or wall, and matching the flange diameter to your tube size is the first decision: 4 in for 2 in tube, 3 in for 1-1/2 in. Because only one screw set is included, mount into a structural substrate or blocking so the rail end cannot pull free. Keep polished brass fittings together in a run so weathering stays even.
Attach wall flanges only into structurally adequate backing; railing ends carry load and must meet applicable building code requirements.
Add the Lavi Industries 500 Series Brass Wall Flange to finish your railing run in polished brass.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
