Skip to content
Johns Manville TPO Walkway Pad, 30 in. x 50 ft. Roll, Gray
Regular price $942.84Johns Manville TPO Walkway Pad, 30 in. x 50 ft. Roll, Gray
The Johns Manville TPO Walkpad is a gray thermoplastic polyolefin (TPO) walkway roll, 30 in. wide by 50 ft. long, that creates a protected traffic path on TPO single-ply roofs. One roll is included per order. It bonds to compatible TPO membrane surfaces to guard against foot traffic, tools, and maintenance activity.
Key Features:
- TPO material match: Made of thermoplastic polyolefin, matching the composition of TPO single-ply membranes for compatible bonding.
- Long roll format: A single 50 ft. roll covers a continuous walkway run with few seams.
- Gray color: Gray finish blends with most gray TPO roofing membranes.
- Traffic protection: Shields the membrane from foot traffic, tool drops, and routine rooftop service wear.
- 30 in. walkway width: The 30 in. width provides a comfortable walking path for service personnel.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 roll, 30 in. x 50 ft. |
| Product line | Johns Manville TPO Walkpad |
| Material | Thermoplastic polyolefin (TPO) |
| Color / finish | Gray |
| Nominal size | 30 in. x 50 ft. |
| Width | 30 in. |
| Length | 50 ft. |
| Coverage per unit | 125 sq. ft. per roll (30 in. x 50 ft.) |
| Intended use | Walkway protection on TPO single-ply roofing |
Coverage & How Much You Need:
One roll provides a 30 in. wide walkway 50 ft. long, approximately 125 square feet. Plan one roll per 50 linear feet of protected path, or less if covering areas around rooftop equipment.
Fit and Compatibility:
Intended for use with TPO single-ply roofing systems, where it is typically welded or adhered to a compatible TPO membrane per Johns Manville's installation instructions. Adhesives or welding equipment are sold separately; confirm membrane brand compatibility before installation.
Frequently Asked Questions (FAQ):
Q: What comes in one order?
A: One roll of Johns Manville TPO Walkpad, 30 in. wide by 50 ft. long, in gray.
Q: How much walkway does a roll cover?
A: A roll produces a 30 in. wide strip 50 ft. long, about 125 square feet of coverage.
Q: How is the pad installed?
A: TPO walkpads are generally hot-air welded or adhered to the TPO membrane following the roofing manufacturer's instructions; the sources do not specify an attachment method.
Q: Is it compatible with PVC roofs?
A: This pad is TPO, so use Johns Manville's PVC Walkpad for PVC membrane roofs to ensure material compatibility.
Q: Will it match my gray TPO roof?
A: The pad is gray, which typically blends with gray TPO membranes; verify against your membrane's color before ordering.
Q: Does it need adhesive?
A: The sources do not state whether adhesive is included; assume bonding materials are sold separately.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Walkpads are standard practice on commercial single-ply roofs, placed at roof hatches, ladder landings, and paths to equipment. Match the pad chemistry to the membrane, TPO to TPO, PVC to PVC, to avoid incompatible plasticizer migration and bonding failures. A 30 in. roll width suits most service routes; for short, discrete traffic points, individual rubber pads may be simpler.
Follow the roofing manufacturer's welding or adhesion procedures and confirm the roof deck can support the work before installing walkpads.
Order the Johns Manville TPO Walkpad roll to build a durable, membrane-safe traffic path on your TPO roof.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
