Skip to content
Johns Manville PVC-60 SD Membrane, 60 in. x 100 ft Roll, White
Regular price $1,062.00Johns Manville PVC-60 SD Membrane, 60 in. x 100 ft Roll, White
Johns Manville PVC-60 SD is a 60-mil single-ply polyvinyl chloride roofing membrane supplied as a white 60 in. x 100 ft roll. The narrower roll width makes it practical for flashings, detail areas and small low-slope roof fields. One roll provides about 500 square feet of coverage before laps.
Key Features:
- 60-mil PVC: .060 in. PVC membrane gauge for durable single-ply roofing performance.
- White surface: White PVC is the standard reflective color for low-slope roof membranes.
- Narrow roll width: 60 in. width is easy to handle and ideal for flashings, penetrations and tight areas.
- Heat-weldable: PVC membrane seams are formed by hot-air welding for a watertight connection.
- Single-ply system: Part of Johns Manville low-slope single-ply roofing systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 roll, 60 in. x 100 ft |
| Product line | Johns Manville PVC single-ply membrane |
| Available colors | ['White'] |
| Available sizes | ['60 in. x 100 ft, 60 mil'] |
| Material | PVC (polyvinyl chloride) |
| Thickness | 60 mil (.060 in.) |
| Dimensions | 60 in. x 100 ft roll |
| Coverage per unit | Approximately 500 sq ft before laps |
| Intended use | Low-slope single-ply roofing, flashings and detailing |
Coverage & How Much You Need:
A 60 in. x 100 ft roll covers approximately 500 square feet before laps and waste. Order rolls based on net area plus side and end lap allowances, or use narrower runs for flashing and detail work.
Fit and Compatibility:
Designed for Johns Manville single-ply PVC roofing systems; pair with JM PVC flashing accessories, plates, fasteners and adhesives as the system specifies, which are sold separately.
Frequently Asked Questions (FAQ):
Q: What does one roll include?
A: One white 60 in. x 100 ft roll of 60-mil PVC single-ply roofing membrane.
Q: How much does a roll cover?
A: About 500 square feet nominal; deduct laps and perimeter detailing to size the job.
Q: Is this wider or narrower than standard membrane?
A: At 60 in., it is narrower than typical field rolls, which makes it convenient for flashings, details and smaller roof areas.
Q: How are seams made?
A: PVC membrane seams are hot-air welded following the manufacturer's requirements.
Q: What else do I need for installation?
A: Substrate preparation, fasteners, plates, and any required adhesives or accessories are specified by the system and sold separately.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
A 60-inch 60-mil PVC roll is a workhorse for flashing and detail work on commercial low-slope roofs; the narrow width handles curbs, walls and penetrations better than wide field rolls. Hot-air weld seams with a test weld at the start of each session. For full field installation, verify the membrane attachment method the system calls for before ordering quantities.
Hot-air welding tools produce very high temperatures; use manufacturer safety practices and comply with roof fall-protection requirements during installation.
Order Johns Manville PVC-60 SD white membrane for dependable 60-mil PVC coverage and detail work.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
