Skip to content
Johns Manville JM TPO Pipe Boot, Non-Reinforced Cone Boot 1 in. to 6 in., Gray or Tan
Regular price $52.50Orders start at $399 — combine any items to reach the minimum. Learn more
Johns Manville JM TPO Pipe Boot, Non-Reinforced Cone Boot 1 in. to 6 in., Gray or Tan
The JM TPO Pipe Boot is a smooth, cone-shaped, non-reinforced TPO boot for traditional or split-pipe flashing applications that securely seals pipe penetrations without field fabrication. It fits pipes from 1 in. to 6 in. and comes with a preformed flange. Available in gray and tan, it is compatible with mechanically fastened and adhered TPO single-ply systems.
Key Features:
- Cone-shaped boot: A smooth, flexible, non-reinforced TPO cone-shaped boot with preformed flange for pipe penetrations.
- Wide pipe range: Accommodates pipe sizes from 1 in. to 6 in.
- No field fabrication: Pipe boots eliminate the need for field-fabricated flashing around pipes.
- Two colors: Available in gray and tan to coordinate with the membrane.
- Secure seal: Designed for traditional or split-pipe flashing applications to securely seal the penetration.
- System compatible: Compatible with mechanically fastened and adhered TPO single-ply systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 boot |
| Product line | JM TPO pipe boots |
| Available colors | Gray, Tan (white also shown in manufacturer description) |
| Available sizes | 1 in. to 6 in. pipe range |
| Material | Flexible, smooth, non-reinforced TPO (thermoplastic polyolefin) |
| Dimensions | Cone boot with preformed flange, fits 1 in. to 6 in. pipe |
| Intended use | Traditional or split-pipe flashing on TPO single-ply systems |
Fit and Compatibility:
Compatible with mechanically fastened and adhered JM TPO single-ply systems. Weld the preformed flange to the TPO field membrane; cut the cone to the pipe diameter during installation.
Frequently Asked Questions (FAQ):
Q: What pipe sizes does it fit?
A: The cone boot is designed for pipe diameters from 1 in. to 6 in., with the cone cut to match the pipe.
Q: What colors are available?
A: The listed variants are gray and tan; the manufacturer description also references white availability.
Q: Is the boot reinforced?
A: No, it is made of flexible, smooth, non-reinforced TPO with a preformed flange.
Q: Can it be used on existing pipes?
A: Yes, it suits traditional or split-pipe flashing applications, so it can seal penetrations in both new and retrofit situations.
Q: Which systems is it compatible with?
A: It is compatible with mechanically fastened and adhered TPO single-ply systems.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
A non-reinforced cone boot with preformed flange is the fastest standard detail for round pipe penetrations on TPO roofs. Cut the cone just below the pipe diameter for a snug fit, then weld the flange fully and terminally seal the top edge. Choose gray or tan to match the membrane; for split or square applications step up to a split or reinforced boot instead.
Cutting the cone and hot-air welding require sharp tools and heat; follow JM installation instructions and roof-top safety practices.
Order the JM TPO Pipe Boot to seal pipe penetrations without field fabrication.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
