Skip to content
Johns Manville .080 PVC SD Plus MIN Membrane, 80 mil White, 10 ft x 75 ft Roll
Regular price $1,425.00Johns Manville .080 PVC SD Plus MIN Membrane, 80 mil White, 10 ft x 75 ft Roll
This Johns Manville PVC SD Plus membrane roll is 80 mil white, 10 ft x 75 ft, a heat-weldable thermoplastic PVC for commercial low-slope roofing. Meets ASTM D 4434, Type III. A non-wicking polyester scrim adds tensile strength, and an aramid-reinforced fastening edge is woven into full rolls. One roll per order.
Key Features:
- Heat-weldable PVC: Heat weldable thermoplastic PVC available in 50, 60 and 80 mil, this roll is 80 mil.
- ASTM Type III: Meets the requirements of ASTM D 4434, Type III.
- Non-wicking scrim: A fully integrated non-wicking reinforced polyester scrim adds tensile strength and toughness; edge sealant is not required on cut edges.
- Aramid-reinforced edge: Patented aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
- Chemical resistance: Inherently resistant to oils, air conditioning coolants, fuels and grease.
- Energy savings: White membrane provides exceptional reflectivity and emissivity for energy savings.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 roll, 10 ft x 75 ft |
| Product line | JM PVC SD Plus |
| Available colors | White, Gray (line); this item is White |
| Available sizes | 80 mil, 10 ft x 75 ft |
| Material | Reinforced thermoplastic PVC |
| Color / finish | White |
| Nominal size | 80 mil x 10 ft x 75 ft |
| Thickness | 80 mil |
| Approvals | ASTM D 4434, Type III |
| Coverage per unit | 750 sq ft per roll |
| Intended use | Commercial low-slope single-ply roofing, especially grease- and chemical-exposed roofs |
Coverage & How Much You Need:
One 10 ft x 75 ft roll covers about 750 sq ft nominal. Deduct for heat-welded laps and perimeter detailing when sizing the job.
Fit and Compatibility:
Part of the JM PVC SD Plus line, designed for hot-air welded seams. Pair with JM PVC flashing, plates, fasteners and accessories sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 80 mil white PVC SD Plus MIN roll, 10 ft x 75 ft.
Q: How much does one roll cover?
A: About 750 sq ft nominal before weld laps and perimeter details.
Q: How are seams made?
A: The membrane is heat weldable, so seams are hot-air welded rather than glued.
Q: Do cut edges need sealant?
A: No, the non-wicking reinforced scrim means edge sealant is not a requirement for cut edges.
Q: Why choose white PVC?
A: White membranes provide exceptional reflectivity and emissivity for energy savings.
Q: Is it good near kitchens or HVAC units?
A: Yes, JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The 80 mil thickness is the toughest option in the SD Plus line and suits roofs with grease exposure from restaurants or heavy mechanical traffic. Aramid-reinforced edges resist tear-out at fasteners. Hot-air welding gives a monolithic seam, but field welding quality depends on operator technique and equipment setup.
Follow the manufacturer's installation instructions and local building codes, and use proper fall protection when working on low-slope roofs.
Order the Johns Manville 80 mil white PVC SD Plus MIN membrane roll for a weldable, chemical-resistant roof.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
