Skip to content
Johns Manville .060 PVC SD Plus Membrane, 60 mil Gray, 10 ft x 100 ft Roll
Regular price $1,628.00Johns Manville .060 PVC SD Plus Membrane, 60 mil Gray, 10 ft x 100 ft Roll
This Johns Manville PVC SD Plus membrane is a 60 mil gray roll, 10 ft x 100 ft, a heat-weldable thermoplastic PVC for commercial low-slope roofing. It meets ASTM D 4434, Type III, with a non-wicking polyester scrim, patented aramid-reinforced fastening edge and inherent resistance to oils, fuels and grease. One roll per order.
Key Features:
- Heat-weldable PVC: Heat weldable thermoplastic PVC available in 50, 60 and 80 mil; this roll is 60 mil.
- ASTM Type III: Meets the requirements of ASTM D 4434, Type III.
- Non-wicking scrim: A non-wicking reinforced polyester scrim adds tensile strength; edge sealant is not required on cut edges.
- Aramid-reinforced edge: Patented aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
- Chemical resistance: Inherently resistant to oils, air conditioning coolants, fuels and grease.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 roll, 10 ft x 100 ft |
| Product line | JM PVC SD Plus |
| Available colors | White, Gray (line); this item is Gray |
| Available sizes | 60 mil, 10 ft x 100 ft |
| Material | Reinforced thermoplastic PVC |
| Color / finish | Gray |
| Nominal size | 60 mil x 10 ft x 100 ft |
| Thickness | 60 mil |
| Approvals | ASTM D 4434, Type III |
| Coverage per unit | 1,000 sq ft per roll |
| Intended use | Commercial low-slope single-ply roofing |
Coverage & How Much You Need:
One 10 ft x 100 ft roll covers about 1,000 sq ft nominal. Deduct for heat-welded laps and perimeter detailing when sizing the job.
Fit and Compatibility:
Part of the JM PVC SD Plus line with hot-air welded seams. Pair with JM PVC flashing, plates, fasteners and accessories sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 60 mil gray PVC SD Plus roll, 10 ft x 100 ft.
Q: How much does one roll cover?
A: About 1,000 sq ft nominal before weld laps and perimeter details.
Q: How are seams made?
A: The membrane is heat weldable, so seams are hot-air welded.
Q: Do cut edges need sealant?
A: No, the non-wicking scrim makes edge sealant unnecessary on cut edges.
Q: Is gray available in other colors?
A: The PVC SD Plus line comes in White and Gray; this roll is Gray.
Q: Is it chemical resistant?
A: Yes, JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Gray 60 mil PVC is a good middle option when reflectivity incentives do not apply but you still want weldable seams and chemical resistance. The aramid-reinforced fastening edge resists tear-out around plates and fasteners. For energy savings or code-required reflectivity, choose the white version instead.
Follow the manufacturer's installation instructions and local building codes, and use proper fall protection when working on low-slope roofs.
Order the Johns Manville 60 mil gray PVC SD Plus membrane roll for a weldable, chemical-resistant roof.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
