Skip to content
Johns Manville .060 EPDM Reinforced Membrane Pre-Taped 1 Side, 60 mil x 10 ft x 100 ft Roll with 4 in. Tape, Black
Regular price $1,435.00Johns Manville .060 EPDM Reinforced Membrane Pre-Taped 1 Side, 60 mil x 10 ft x 100 ft Roll with 4 in. Tape, Black
This Johns Manville .060 reinforced EPDM membrane is a 60 mil black roll, 10 ft x 100 ft, with factory-applied 4 in. inseam tape on one side for R FIT 60 mil and 75 mil systems. Cured EPDM is reinforced with a 1,000+ denier polyester mat for excellent puncture and hail resistance. One factory tape edge means faster seams on one side of the sheet.
Key Features:
- Factory inseam tape: Pre-taped on one side with 4 in. tape for superior quality assurance and labor savings versus field-fabricated seams.
- Polyester reinforcement: Cured EPDM reinforced with a tough 1,000+ denier polyester mat provides excellent puncture and hail resistance.
- ASTM Type II: Meets the requirements of ASTM D 4637, Type II.
- Fully extruded sheet: Fully extruded production yields fewer air voids, more uniform thickness and smoother sheets.
- Vulcanized monolithic: Vulcanization combines two membrane layers into a fully cross-linked monolithic membrane.
- Extreme climate ready: The polymer formulation performs in extreme temperatures and withstands differential movement.
- UV and ozone resistance: UV-stabilization properties deliver outstanding ozone and weather resistance and long service life.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 roll, 60 mil x 10 ft x 100 ft with 4 in. tape 1 side |
| Product line | JM EPDM Systems (R FIT 60 mil and R FIT 75 mil) |
| Available colors | Black |
| Available sizes | 60 mil x 10 ft x 100 ft, 4 in. tape 1 side |
| Material | Cured EPDM reinforced with 1,000+ denier polyester mat |
| Color / finish | Black |
| Nominal size | .060 in. (60 mil) x 10 ft x 100 ft, 4 in. factory inseam tape 1 side |
| Thickness | 60 mil |
| Approvals | ASTM D 4637, Type II |
| Coverage per unit | 1,000 sq ft per roll |
| Intended use | Commercial low-slope single-ply roofing |
Coverage & How Much You Need:
One 10 ft x 100 ft roll covers about 1,000 sq ft nominal. Allow for taped overlaps and perimeter detailing when sizing the roof area per roll.
Fit and Compatibility:
Made for Johns Manville R FIT 60 mil and 75 mil EPDM systems. Use with JM flashing, primers and accessories sold separately.
Frequently Asked Questions (FAQ):
Q: What is included with this roll?
A: One 60 mil black reinforced EPDM roll, 10 ft x 100 ft, with 4 in. factory inseam tape on one side.
Q: How much does one roll cover?
A: About 1,000 sq ft nominal before seam laps and perimeter conditions.
Q: Why choose one-side tape?
A: Factory tape on one edge gives quality-assured seams where seams fall on that side, saving labor over field fabrication.
Q: Is the membrane reinforced?
A: Yes, cured EPDM reinforced with a 1,000+ denier polyester mat.
Q: What standard does it meet?
A: It meets the requirements of ASTM D 4637, Type II.
Q: Does it handle hot and cold climates?
A: Yes, the formulation performs in extreme temperature climates and withstands differential movement.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
One-side pre-tape is ideal when your seam layout puts laps on a single edge of each sheet. The reinforced construction adds toughness for hail-prone areas. Check sheet alignment before peeling tape liners, since factory tape sets fast once mated.
Follow the manufacturer's installation instructions and local building codes, and use proper fall protection when working on low-slope roofs.
Order the Johns Manville .060 reinforced EPDM pre-taped 1-side membrane roll today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
