Skip to content
James Hardie HZ10 Artisan V-Groove Lap Siding, 8.25 in. x 12 ft., Primed Fiber Cement
Regular price $62.72Orders start at $399 — combine any items to reach the minimum. Learn more
James Hardie HZ10 Artisan V-Groove Lap Siding, 8.25 in. x 12 ft., Primed Fiber Cement
This James Hardie HZ10 Artisan lap siding is a 8.25 in. x 12 ft. fiber cement board with a V-groove profile, supplied primed and ready for finish paint. Each sell unit is one piece. The HZ10 engineering is intended for hotter, drier regional climates, and the Artisan line delivers a premium, thicker-profile lap look.
Key Features:
- Fiber cement strength: Made of fiber cement for long-lasting exterior cladding performance.
- V-groove profile: Artisan V-groove profile creates crisp shadow lines between courses.
- HZ10 climate engineering: HZ10 product engineering is designed for regional climate performance.
- Primed for paint: Supplied primed so it can be finished in the color of your choice.
- 8.25 in. exposure width: 8.25 in. board width supports generous lap exposure.
- 12 ft. boards: 12 ft. length reduces butt joints on long walls.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | James Hardie |
| Sell unit | 1 piece, 8.25 in. x 12 ft. |
| Product line | James Hardie HZ10 Artisan Lap Siding |
| Available colors | Primed |
| Available sizes | 8.25 in. x 12 ft. |
| Material | Fiber cement |
| Profile | V-Groove |
| Width | 8.25 in. |
| Length | 12 ft. |
| Finish / texture | Primed, ready for field painting |
| Intended use | Exterior lap siding cladding |
Coverage & How Much You Need:
One piece is 12 ft. long; with an 8.25 in. board the actual coverage per course depends on your chosen lap exposure, which will be less than 8.25 in. Divide wall area by the exposure you select to estimate pieces, and add waste for laps and cut-offs.
Fit and Compatibility:
Part of the James Hardie Artisan line and intended for installation within the HZ10 climate region per James Hardie requirements. Pair with Hardie trim, flashing, and fastening systems, and finish with exterior paint over the primed surface.
Frequently Asked Questions (FAQ):
Q: What is included in one unit?
A: One piece of 8.25 in. x 12 ft. V-groove lap siding in primed finish.
Q: Is it pre-finished?
A: It comes primed; a topcoat of exterior paint is required for the finished color.
Q: What does HZ10 mean?
A: HZ10 is James Hardie's product engineering for specific regional climate conditions; confirm suitability for your project location with James Hardie's zone guidance.
Q: What exposure should I use?
A: Exposure is set by the installer within James Hardie's limits for the profile; coverage per piece depends on the exposure chosen.
Q: How should it be fastened and flashed?
A: Follow James Hardie's installation instructions for fastener type, spacing, flashing, and clearances to ensure warranty compliance.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The Artisan V-groove lap gives a deeper, more architectural shadow line than standard HardiePlank, so it suits premium elevations and modern designs. Because it ships primed, plan the paint coat into the schedule and budget. Store boards flat and dry, cut with fiber cement dust controls, and keep field exposure within James Hardie's published limits to protect the installation.
Cut fiber cement with dust-reducing methods and wear a respirator, eye protection, and gloves per James Hardie's cutting guidance.
Order James Hardie HZ10 Artisan V-Groove primed lap siding for crisp, premium fiber cement cladding.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
