Skip to content
Golden Rule Goldenseal Shingle Retrofit EPDM Pipe Flashing, 0 in. to 3-3/8 in. Pipe
Regular price $58.00Orders start at $399 — combine any items to reach the minimum. Learn more
Golden Rule Goldenseal Shingle Retrofit EPDM Pipe Flashing, 0 in. to 3-3/8 in. Pipe
The Golden Rule Goldenseal is an EPDM retrofit pipe flashing made specifically for shingle roofs. One piece fits pipes from 0 in. to 3-3/8 in. and is recommended for roof pitches of 27° to 57° (6:12 to 18:12). The retrofit seal closes with pliers using the included stainless steel clips.
Key Features:
- EPDM retrofit design: An EPDM retrofit flashing designed specifically for use on shingle roofs.
- Wide pitch range: Recommended for roofs pitched 27° to 57°, equivalent to 6 on 12 up to 18 on 12.
- Stainless steel clips: Stainless steel clips are provided with each flashing to close the retrofit seal.
- Simple crimp closure: The retrofit seal closes easily by crimping the clips tight with a pair of pliers.
- Off-pitch adaptable: Roofs with more or less slope than the recommended range can be accommodated by making a special cut instead of using the factory cutting marks.
- Professional option: Installation by a roofing professional is recommended when adapting the flashing for slopes outside the recommended range.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Golden Rule Fasteners |
| Sell unit | 1 piece |
| Product line | Goldenseal Shingle Retrofit Flashing |
| Material | EPDM |
| Nominal size | Fits pipes 0 in. to 3-3/8 in. |
| Pitch range | 27° to 57° (6:12 to 18:12) recommended |
| Intended use | Retrofit pipe flashing for shingle roofs |
| Included hardware | Stainless steel closure clips |
| Installation | Pliers-crimped stainless steel clips; special cut for slopes outside recommended range |
Fit and Compatibility:
Designed for use on shingle roof systems as a retrofit around pipes up to 3-3/8 in. diameter. For roof slopes outside the 27° to 57° recommended range, a special cut is required and professional installation is advised.
Frequently Asked Questions (FAQ):
Q: What pipe sizes does this flashing fit?
A: A single unit fits pipes from 0 in. up to 3-3/8 in. in diameter.
Q: What roof pitches does it work on?
A: It is recommended for pitches of 27° to 57° (6:12 to 18:12); other slopes require a special cut instead of the factory cutting marks.
Q: How is the seal closed?
A: Use a pair of pliers to crimp the stainless steel clips provided with each flashing until the retrofit seal is tight.
Q: What material is it made of?
A: The flashing is made of EPDM, designed specifically for shingle roof applications.
Q: What is included with one unit?
A: Each piece includes the EPDM retrofit flashing and its stainless steel closure clips; it sells as one piece.
Q: Can I install it myself on a steep or shallow roof?
A: On slopes outside the recommended range, installation by a roofing professional is recommended.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The Goldenseal retrofit approach lets you flash a pipe without tearing back surrounding shingles, which makes it a strong choice for repair and re-roof touch-up work. Verify the pipe diameter falls within the 0 to 3-3/8 in. range and confirm roof pitch before ordering. On steep or shallow slopes, plan for the special cut and consider a professional installer to keep the seal watertight.
Work on roofs of 27° to 57° pitch requires proper fall protection; for slopes outside the recommended range, have a roofing professional make the special cut and complete the installation.
Order the Golden Rule Goldenseal Shingle Retrofit Flashing for a fast, watertight pipe seal on your shingle roof.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
