GL Veneer Cherry Wood Veneer Sheet, Clear Plain Sliced, PSA Backed, 24 in. x 96 in.

This is a plain sliced cherry wood veneer sheet with PSA pressure sensitive adhesive backing, sold as one 24 in. x 96 in. sheet. It shows a warm, light pink to reddish brown color that darkens over time, with straight grain, fine even texture and hints of figure. Apply it to MDF, particleboard or plywood for doors, panels and fine interior millwork.

Key Features:

• PSA peel-and-stick backing: Pressure sensitive adhesive backing allows positioning and pressing without separate contact cement.
• Warm cherry color: Light pink to reddish brown heartwood that naturally darkens with age and light exposure.
• Fine even texture: Straight grain with fine, even texture and hints of figure.
• Classic American species: Sourced from Eastern North America, from Southeastern Canada to Texas, largely Pennsylvania.
• Narrow long sheet: The 24 in. x 96 in. size suits door faces, rails and long panel inserts.

Specifications Table:

Coverage & How Much You Need:

One sheet covers 24 in. x 96 in., or 16 square feet, before trimming waste. Allow trim allowance on all sides and sequence sheets so color matches across adjacent panels.

Fit and Compatibility:

Bonds to smooth, sealed substrates such as MDF, particleboard or plywood using its PSA backing. Stains, clear coats, edge banding and reverse-face balancing veneers are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included with the sheet?
A: One 24 in. x 96 in. plain sliced cherry veneer sheet with PSA pressure sensitive adhesive backing. Finishing and edge materials are sold separately.

Q: How much area does one sheet cover?
A: One sheet covers 16 square feet before trimming waste, suitable for door faces or long narrow panels.

Q: Does cherry change color over time?
A: Yes, the sources describe a warm light pink to reddish brown color that darkens over time with age and light.

Q: How do I install PSA-backed veneer?
A: Align the sheet on a clean, smooth substrate, then peel the liner progressively and press firmly from the center outward with a roller or veneer hammer.

Q: What substrate works best?
A: Smooth MDF or quality particleboard is ideal; put a balancing backer on the opposite face to keep the panel flat.

Q: Can I stain the veneer?
A: Yes, cherry is commonly finished clear or stained; always test your finish on an offcut first.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

PSA-backed cherry is efficient for door faces and narrow panel work, but adhesion is only as good as the substrate preparation, so sand and clean the MDF or particleboard thoroughly. Expect color variation between leaves and darken-in over time; finish all surfaces of a job at the same time for uniform tone. Keep a balancing veneer on the back of each panel to prevent cupping.

Trimmed veneer edges and blades are sharp; wear gloves and eye protection when cutting and sanding.

Order the GL Veneer Cherry Wood Veneer Sheet for warm, straight-grained cherry on doors, panels and millwork.