Skip to content
GAF Drill-Tec Galvalume AccuTrac 3 in. Flat Insulation Plates, Mill Finish, 1000 per Box
Regular price $615.00GAF Drill-Tec Galvalume AccuTrac 3 in. Flat Insulation Plates, Mill Finish, 1000 per Box
GAF Drill-Tec Galvalume AccuTrac Flat Plates are 3 in. Galvalume-coated steel insulation plates used to attach insulation and cover boards on commercial roofing assemblies. Each box contains 1,000 mill-finish plates. They pair with Drill-Tec #12 or Drill-Tec #14 fasteners.
Key Features:
- Corrosion protection: Plates are produced from Galvalume-coated steel for years of corrosion-free service.
- Approved for FM: The plates meet the requirements of ASTM D6294, FM Approval Standard 4470, and DIN 50018.
- Miami-Dade approved: Factory Mutual and Miami-Dade County Product Control approved.
- Ribbed reinforcement: The 3 in. Square Recessed AccuTrac Plate features deep reinforcing ribs for superior resistance to bending.
- Flat bottom option: A 3 in. Square Flat Bottom AccuTrac Plate can be used with hard board insulation.
- Versatile attachment: Ideal for attaching both insulation and cover boards.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | GAF |
| Sell unit | 1 box, 1000 plates |
| Product line | GAF Drill-Tec |
| Available colors | Mill |
| Available sizes | 3 in. square, 1000/Box |
| Material | Galvalume-coated steel |
| Finish / texture | Mill |
| Dimensions | 3 in. (76 mm) square |
| Plate styles | Square Recessed AccuTrac with deep reinforcing ribs; Square Flat Bottom for hard board insulation |
| Approvals | ASTM D6294, FM Approval Standard 4470, DIN 50018, Miami-Dade County Product Control approved |
| Pack quantity | 1000 plates per box |
| Intended use | Attaching insulation and cover boards in commercial roofing assemblies |
Coverage & How Much You Need:
One box of 1,000 plates covers fastener attachment points across an insulation or cover board installation; plate quantity per square depends on fastening pattern and the plate spacing specified for the insulation type.
Fit and Compatibility:
These plates are part of the GAF Drill-Tec attachment line and are used with Drill-Tec #12 or Drill-Tec #14 fasteners; a plastic 3-degree locking plate is also available in the Drill-Tec range. Fasteners are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one box?
A: One box contains 1,000 mill-finish 3 in. Galvalume steel AccuTrac flat plates.
Q: Which fasteners do these plates fit?
A: The Drill-Tec plates are used with GAF Drill-Tec #12 or Drill-Tec #14 fasteners, which are sold separately.
Q: Can they be used with hard board insulation?
A: Yes, the Square Flat Bottom AccuTrac Plate can be used with hard board insulation.
Q: Are they corrosion resistant?
A: Yes, the plates are produced from Galvalume-coated steel for corrosion-free service.
Q: What approvals do the plates carry?
A: They meet ASTM D6294, FM Approval Standard 4470, and DIN 50018, and are Factory Mutual and Miami-Dade County Product Control approved.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Choose the ribbed Square Recessed plate for general insulation attachment where bending resistance matters, and the Flat Bottom plate over hard board insulation. Match plate count to the fastening pattern required by the roof assembly, since dense low-rise foam and wind-uplift zones often require closer plate spacing. Always pair with the Drill-Tec fastener size called out in the assembly specification.
Plate edges and fastener points can be sharp; wear gloves and eye protection when handling and driving insulation fasteners.
Order GAF Drill-Tec Galvalume AccuTrac Flat Plates today for your next commercial insulation attachment job.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
