Skip to content
Fry Reglet ST Stucco Reglet, Galvanized Steel Transition Flashing, 10 ft., 24 Gauge
Regular price $317.50Orders start at $399 — combine any items to reach the minimum. Learn more
Fry Reglet ST Stucco Reglet, Galvanized Steel Transition Flashing, 10 ft., 24 Gauge
The Fry Reglet ST Stucco Reglet is galvanized steel transition flashing made especially for stucco applications. It installs over 3/4 in. baseboard prior to lathing, accepts Springlok Flashing after the roofing paper is applied, and is then covered by the stucco. Each sell unit is 10 linear feet of 24 gauge galvanized reglet.
Key Features:
- Made for Stucco: The ST Stucco Reglet is designed specifically for stucco wall-to-roof transition details.
- Galvanized Steel: Galvanized steel construction for durable flashing performance at stucco terminations.
- 24 Gauge: Formed from 24 gauge steel for a rigid, straight reglet line.
- Springlok System: Accepts Springlok Flashing, which locks into place after the roofing paper is applied.
- 10 ft. Length: Supplied in 10 ft. lengths to cover long runs with fewer joints.
- Staged Installation: Installs over 3/4 in. baseboard prior to lathing, before stucco is applied over top.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Fry Reglet |
| Sell unit | 1 piece, 10 ft. |
| Product line | ST Stucco Reglet |
| Dimensions | 10 ft. length; installs over 3/4 in. baseboard |
| Material | Galvanized steel |
| Finish / texture | Galvanized |
| Thickness | 24 gauge |
| Coverage per unit | 10 linear ft. per piece |
| Intended use | Stucco-to-roof transition flashing with Springlok Flashing system |
Coverage & How Much You Need:
Each 10 ft. piece covers 10 linear feet of stucco-to-roof transition. Measure the total horizontal run of the stucco termination and order enough pieces to cover it with tight joints between lengths.
Fit and Compatibility:
Designed for use with the Fry Reglet ST stucco detail over 3/4 in. baseboard and with Fry Reglet Springlok Flashing, which locks in after the roofing paper is applied. Springlok Flashing and baseboard are ordered separately.
Frequently Asked Questions (FAQ):
Q: What is included in the sell unit?
A: One 10 ft. length of 24 gauge galvanized ST Stucco Reglet; Springlok Flashing and baseboard are sold separately.
Q: When is it installed?
A: It is placed over 3/4 in. baseboard prior to lathing, then stucco is applied over top.
Q: How does the flashing attach?
A: Springlok Flashing locks into the reglet after the roofing paper is applied.
Q: What material is it made of?
A: It is galvanized steel, formed in 24 gauge.
Q: How much do I need?
A: Order 10 ft. pieces to match the total linear footage of your stucco termination, allowing for joints.
Q: What is it for?
A: It creates a concealed flashing receiver at the transition where stucco walls meet the roof line.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Sequence matters with reglet details: set the reglet over the baseboard before lathing, apply roofing paper, then lock in the Springlok flashing before the stucco coat goes on. Keep reglet runs level and shim to a consistent line so the flashing engages cleanly along the full run. Galvanized steel suits most stucco details; confirm substrate compatibility on coastal projects.
Galvanized flashing edges can be sharp; wear cut-resistant gloves and follow the flashing manufacturer's installation sequence.
Order Fry Reglet ST Stucco Reglet in galvanized 24 gauge, 10 ft. lengths, for your stucco transition flashing detail.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
