Skip to content
FRY REGLET JDM-50 Aluminum J Molding, 1/2 in. Depth, 10 ft. Stick, Clear Anodized
Regular price $25.00Orders start at $399 — combine any items to reach the minimum. Learn more
FRY REGLET JDM-50 Aluminum J Molding, 1/2 in. Depth, 10 ft. Stick, Clear Anodized
Fry Reglet JDM-50 J Molding provides a clean, attractive termination for drywall or wood paneling, receiving the wall finish and concealing the edge with no taping required. It is extruded aluminum alloy 6063 T5, 1/2 in. J depth, 3/16 in. lip, 1-1/8 in. flange, in 10 ft. sticks. One stick per order.
Key Features:
- No-taping termination: The J section receives the wall finish and conceals the drywall edge with no taping required.
- 1/2 in. J depth: Dimensioned with a 1/2 in. J depth, 3/16 in. lip and 1-1/8 in. flange.
- 6063-T5 aluminum: Extruded aluminum alloy 6063 T5 for straight, durable trim.
- Interior/exterior: General-purpose trim suitable for interior or exterior use on plaster, stucco, drywall or wood panels.
- 10 ft. stick: Ships as 10 ft. pieces for long, clean runs.
- Finish options: Available in clear anodized or custom-painted colors.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Fry Reglet |
| Manufacturer model | JDM-50 |
| Sell unit | 1 molding stick, 10 ft. |
| Material | Extruded aluminum alloy 6063 T5 |
| Color / finish | Clear anodized (also available custom painted) |
| J depth (Dim. A) | 1/2 in. |
| Lip (Dim. B) | 3/16 in. |
| Flange (Dim. C) | 1-1/8 in. |
| Length | 10 ft. |
| Intended use | Terminating and finishing plaster, stucco, drywall or wood panels, interior or exterior |
| Pack quantity | 15 pieces per carton (order by the piece) |
| Assembly | Installed with the wall framing; no assembly required |
Coverage & How Much You Need:
Each 10 ft. stick trims 10 linear feet of drywall or panel edge. Measure your termination runs and order sticks accordingly; full cartons of 15 pieces are available at added discounts.
Fit and Compatibility:
Part of the Fry Reglet reveals and moldings system; pairs with other Fry Reglet drywall, plaster and stucco trims. Deeper JDM-625 (5/8 in.) and other J molding depths (3/4 in., 1 in.) and lip sizes (1/2 in.) are available separately. Weep holes are available upon request.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 10 ft. stick of JDM-50 J Molding in clear anodized 6063 aluminum.
Q: What size drywall does it fit?
A: The J depth is 1/2 in., sized for standard 1/2 in. drywall or panel thickness; a 5/8 in. depth (JDM-625) is available separately.
Q: Can it be used outdoors?
A: Yes, it is a general-purpose interior or exterior trim for plaster, stucco, drywall or wood panels.
Q: Do I have to tape the edge?
A: No, the J section receives the wall finish and conceals the edge with no taping required.
Q: Are painted colors available?
A: Yes, custom-painted versions in colors such as white, black, bronze and silver satin are available; small painted orders may require a setup fee.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use JDM-50 wherever a drywall or panel edge meets a door, window, ceiling or open wall end and you want to skip taping. Confirm your board thickness before ordering: the 1/2 in. J depth suits standard board, while 5/8 in. board needs the JDM-625. Fasten to framing through the flange and leave the J channel clear so the board slips in fully.
Cut aluminum trim edges are sharp; wear gloves and eye protection when cutting and handling molding.
Order Fry Reglet JDM-50 J Molding for clean, no-tape drywall terminations.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
