Franklin International Titebond 100% Silicone Sealant, White, 10.1 oz Cartridge (12-Pack)

Titebond 100% Silicone Sealant in White is a flexible, watertight, mildew-resistant sealant supplied as twelve 10.1 oz cartridges per box. It bonds to vinyl, aluminum, brick, glass and painted surfaces for doors, windows, siding, vents, tubs and sinks, inside or out. Apply with a standard caulking gun; each cartridge yields up to 123 ft of 1/8 in. bead.

Key Features:

• Interior/exterior use: Ideal for both interior and exterior applications with excellent adhesion to many common construction materials.
• Broad adhesion: Adheres to vinyl, aluminum, brick, glass and painted surfaces.
• Watertight and mildew resistant: Provides a flexible, watertight and mildew-resistant seal.
• Extreme temperature service: Withstands extreme temperature changes with a service range of -60°F to 350°F (-51°C to 177°C).
• Won't crack or freeze: Maintains color with age, will not crack or become brittle, and will not freeze.
• Low VOC: VOC content is below 50 g/L.
• Long working time: Working time is approximately 15-20 minutes for a 1/4 in. bead.

Specifications Table:

Coverage & How Much You Need:

Each 10.1 oz cartridge lays about 123 ft of 1/8 in. bead, 31 ft at 1/4 in., 14 ft at 3/8 in., or 8 ft at 1/2 in. Joints should be properly designed and not exceed 1/2 in. in width.

Fit and Compatibility:

Adheres to vinyl, aluminum, brick, glass and painted surfaces, among other common construction materials; it is not paintable, so paint before sealing. It is not designed for continuous submersion or use below the waterline, and should not be applied if rain is expected within 12 hours. Users should test proposed uses with all substrates for project suitability.

Frequently Asked Questions (FAQ):

Q: What is included in a box?
A: The pack contains 12 white 10.1 oz cartridges of Titebond 100% Silicone Sealant.

Q: How far does one cartridge go?
A: One 10.1 oz cartridge yields about 123 ft of 1/8 in. bead, 31 ft at 1/4 in., 14 ft at 3/8 in., or 8 ft at 1/2 in.

Q: Can I paint over it?
A: No, this silicone is not paintable; paint the surfaces before sealing.

Q: What surfaces does it stick to?
A: It offers excellent adhesion to vinyl, aluminum, brick, glass, painted surfaces and many other common construction materials.

Q: How is it applied and cleaned up?
A: Apply with a cartridge/caulking gun above -40°F; clean uncured material with mineral spirits, and cut or scrape away cured excess.

Q: Can it be used underwater or in a tub?
A: It seals tubs and sinks but is not designed for continuous submersion or use below the waterline.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Pick Titebond 100% Silicone when you need a permanently flexible, mildew-resistant joint that survives freeze/thaw and -60°F to 350°F service. Keep joints under 1/2 in. wide, tool the bead immediately, and remember to paint first since silicone will not take paint. Allow 12 hours of rain-free cure time and skip below-waterline or continuously submerged joints. The acetic-acid cure smell is normal for this chemistry.

Use in a ventilated area as this sealant releases acetic acid vapor while curing, and follow solvent vendor precautions when cleaning with mineral spirits.

Order the Titebond 100% Silicone Sealant 12-pack in White for watertight, mildew-resistant joints.