Skip to content
FLAMCO Galvanized Z-Bar Flashing, Mill Finish, Multiple Profiles
Regular price $13.20Orders start at $399 — combine any items to reach the minimum. Learn more
FLAMCO Galvanized Z-Bar Flashing, Mill Finish, Multiple Profiles
FLAMCO's Galvanized Z-Bar Flashing fits between stacked sheets of siding to stop water from leaking behind the lower sheets. It has a center stretch designed for 3/8 in. siding and suits residential and commercial weatherproofing applications. The line is sold per piece in mill-finish galvanized steel with three profile choices.
Key Features:
- Blocks leaks: Fits between stacked siding sheets to prevent water leaking behind lower sheets.
- Sized for siding: Center stretch designed for 3/8 in. siding.
- Galvanized steel: Galvanized steel offers durable, low-maintenance weather protection.
- Resi and commercial: Compatible with residential and commercial weatherproofing applications.
- Mill finish: Mill finish suits concealed flashing locations.
- Three profiles: Offered in 3/8 x 1 x 1-5/8, 1-3/4 x 3/4 x 1/2 and 1/2 x 1-1/4 x 2 in. profiles.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | FLAMCO |
| Sell unit | 1 piece |
| Product line | FLAMCO Galvanized Z-Bar Flashing |
| Available colors | Mill |
| Available sizes | 3/8 in. x 1 in. x 1-5/8 in.; 1-3/4 in. x 3/4 in. x 1/2 in.; 1/2 in. x 1-1/4 in. x 2 in. |
| Material | Galvanized steel |
| Finish / texture | Mill |
| Dimensions | Z-profiles as listed per variant |
| Intended use | Siding transition flashing between stacked siding sheets; residential and commercial weatherproofing |
| Assembly | No assembly required |
Coverage & How Much You Need:
One piece covers the wall length of a single Z-bar section; measure the horizontal run at each siding break and divide by the piece length, lapping joints in the direction of water flow.
Fit and Compatibility:
Used with stacked siding sheets, with the center stretch designed for 3/8 in. siding. Siding panels, fasteners and sealant are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included with each order?
A: One piece of mill-finish galvanized Z-bar flashing in the selected profile.
Q: What siding is it designed for?
A: The center stretch is designed for 3/8 in. siding.
Q: Which profiles are available?
A: Three mill-finish profiles: 3/8 x 1 x 1-5/8 in., 1-3/4 x 3/4 x 1/2 in. and 1/2 x 1-1/4 x 2 in.
Q: Why use Z-bar flashing?
A: It prevents water from leaking behind the lower siding sheet where upper and lower sheets are stacked.
Q: Can it be used commercially?
A: Yes, it is compatible with residential and commercial weatherproofing applications.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Install Z-bar at every horizontal break where upper siding laps over lower siding, with the upper leg behind the upper sheet and the lower leg over the lower course. Keep the center stretch seated over the 3/8 in. siding reveal so water drips clear, and lap joints in the direction of water flow. Mill finish is right for concealed flashing; choose a colored flashing if the Z-bar will be visible.
Cut galvanized flashing edges are sharp; wear cut-resistant gloves and eye protection when cutting and installing.
Protect stacked siding courses with FLAMCO Galvanized Z-Bar Flashing, available in three mill-finish profiles.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
