Skip to content
EPCO MC402 Solid Brass Wire Pull, 5/16 in Dia, 3 in to 4 in CC and 96 mm CC, Multiple Finishes
Regular price $6.79Orders start at $399 — combine any items to reach the minimum. Learn more
EPCO MC402 Solid Brass Wire Pull, 5/16 in Dia, 3 in to 4 in CC and 96 mm CC, Multiple Finishes
The EPCO MC402 Solid Brass Wire Pull is a 5/16 in diameter bent-wire cabinet pull with 1-5/16 in projection, offered in 3 in, 3-1/2 in, 4 in and 96 mm CC hole spacings. Fifteen finish and size combinations are available from Polished Brass to Dull Chrome. Each order is 1 piece; match the CC to your drawer or door holes.
Key Features:
- Solid brass construction: Machined from solid brass for a substantial, durable wire pull.
- Metric and inch spacing: Sizes include 3 in CC, 3-1/2 in CC, 4 in CC and 96 mm CC to match both metric and inch-drilled cabinetry.
- Wide finish range: Five finishes: Brushed Chrome, Dull Chrome, Oil-Rubbed Bronze, Polished Brass and Polished Chrome, plus US10.
- Classic wire profile: 5/16 in diameter rod with 1-5/16 in projection gives a traditional wire-pull look.
- Fifteen variants: Fifteen size and finish combinations let you equip an entire kitchen consistently.
- Fits existing holes: Pick the CC equal to your current hole spacing for a no-redrill swap.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | EPCO |
| Sell unit | 1 piece |
| Collection | MC402 |
| Product type | Wire pull |
| Available finishes | Brushed Chrome, Dull Chrome, Oil-Rubbed Bronze, Polished Brass, Polished Chrome, US10 |
| Available sizes | 3 in CC, 3-1/2 in CC, 4 in CC, 96 mm CC (15 items total) |
| Overall length / width / projection | 5/16 in diameter, 1-5/16 in projection as printed |
| Material | Solid brass |
| Mounting | Two-screw installation; CC is the hole spacing that must match your drawer or door |
| Intended use | Cabinet and drawer pull |
Fit and Compatibility:
Part of the EPCO MC402 wire pull line alongside the aluminum and stainless steel versions. Choose the CC size matching existing holes; other EPCO hardware in matching finishes is sold separately.
Frequently Asked Questions (FAQ):
Q: What does 96 mm CC equal in inches?
A: 96 mm is about 3-3/4 in center-to-center; order this only if your holes are drilled at 96 mm.
Q: How many finish and size options are there?
A: Fifteen variants across 3 in, 3-1/2 in, 4 in and 96 mm CC and five finishes plus US10.
Q: What material is the pull?
A: Solid brass with decorative plating or finish such as Polished Chrome or Oil-Rubbed Bronze.
Q: Is this a good replacement for older pulls?
A: Yes, match the CC spacing and finish family to your existing hardware for a clean swap.
Q: What is included?
A: One pull per order; the listing does not state screw inclusion.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Solid brass pulls feel heavier and wear better than stamped alternatives, making them a good pick for frequently used kitchen drawers. When mixing brass and chrome in one room, use Oil-Rubbed Bronze or Dull Chrome on less visible pieces to avoid a patchwork look. Measure your existing hole spacing precisely before choosing between 3-1/2 in and 96 mm CC, since they are nearly the same but not interchangeable.
Hand-tighten mounting screws; overtorque can strip plated brass threads or mar the finish.
Choose your EPCO MC402 Solid Brass Wire Pull in the CC size and finish for your project.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
