Skip to content
EPCO DP412 Aluminum Drawer Pull, 3 in CC, Flush Mortise Mount, 4 Anodized Finishes
Regular price $105.88Orders start at $399 — combine any items to reach the minimum. Learn more
EPCO DP412 Aluminum Drawer Pull, 3 in CC, Flush Mortise Mount, 4 Anodized Finishes
This is the EPCO DP412 aluminum drawer pull line with a 3 in center-to-center hole spacing and flush mortise mounting for 3/4 in thick doors. Two lengths are offered: 3-7/8 in L x 3/4 in W pieces and a 6 ft L x 3/4 in W stock length, in four satin anodized finishes. Each order unit is one pull.
Key Features:
- Standard 3 in CC: 3 in center-to-center spacing fits common drawer pull hole patterns.
- Anodized finishes: Choose Satin Brass, Satin Bronze/Anodized, Satin Clear/Anodized or Satin Dark Bronze/Anodized.
- Flush mortise design: Mortises into the edge or face for a clean low-profile grip.
- Two length options: Offered as 3-7/8 in L pulls and a 6 ft L stock length.
- Door thickness fit: Designed for 3/4 in thick doors.
- Aluminum build: Aluminum construction keeps the pull light and corrosion resistant.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | EPCO |
| Sell unit | 1 piece |
| Collection | DP412 |
| Product type | Drawer pull |
| Available finishes | Satin Brass, Satin Bronze/Anodized, Satin Clear/Anodized, Satin Dark Bronze/Anodized (4 finishes) |
| Available sizes | 3 in CC; lengths 3-7/8 in L and 6 ft L, 3/4 in W |
| Overall length / width / projection | 3-7/8 in or 6 ft L x 3/4 in W, 1-3/4 in projection, 3 in CC |
| Material | Aluminum |
| Color / finish | Satin anodized finishes |
| Mounting | Flush mortise mount |
| Intended use | 3/4 in thick doors and drawers |
Fit and Compatibility:
Part of the EPCO DP-series aluminum pull line. Made for 3/4 in thick doors; screws are not listed for this line, so confirm fastener requirements before installation.
Frequently Asked Questions (FAQ):
Q: What does 3 in CC mean?
A: CC (center-to-center) is the distance between the two mounting holes; 3 in CC must match the existing hole spacing on your drawer or door.
Q: What lengths are offered?
A: Two lengths are listed: 3-7/8 in L x 3/4 in W and a 6 ft L x 3/4 in W stock length.
Q: Which finishes can I choose?
A: Satin Brass, Satin Bronze/Anodized, Satin Clear/Anodized and Satin Dark Bronze/Anodized.
Q: Will it fit my door?
A: The pull is specified for 3/4 in thick doors with a flush mortise mount.
Q: Are screws included?
A: Screws are not listed in the manufacturer description for the DP412; verify fasteners before installing.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Always match the 3 in CC to your existing hole pattern before ordering, since CC spacing cannot be adjusted. The 6 ft stock length can be cut for longer runs of drawer fronts or continuous pulls, while the 3-7/8 in pieces suit standard drawer widths. Anodized finishes hold up well to daily handling and blend with both modern and traditional doors.
Wear eye protection when mortising the door or cutting the 6 ft length to size, and deburr any cut edges before handling.
Choose the EPCO DP412 aluminum drawer pull in your finish and length for a flush, anodized look.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
