Skip to content
EPCO DP41 Aluminum Drawer Pull 1 in and 2 in CC Back Mount Satin Anodized and Bronze Finishes
Regular price $41.69Orders start at $399 — combine any items to reach the minimum. Learn more
EPCO DP41 Aluminum Drawer Pull 1 in and 2 in CC Back Mount Satin Anodized and Bronze Finishes
The EPCO DP41 is a back-mount aluminum drawer pull offered in 1 in CC (1-1/2 in long) and 2 in CC (3 in long) sizes plus a 6 ft x 1/2 in continuous length, all 1/2 in wide with 1-9/16 in projection. Five finishes are available: oil-rubbed bronze, satin brass, satin bronze/anodized, satin black/anodized and satin clear/anodized. It fits 1/2 to 7/8 in thick material; screw sizes are not stated in the source.
Key Features:
- Compact sizes: Choose 1 in CC (1-1/2 in L) or 2 in CC (3 in L) for small drawers and doors.
- Five finish choices: Oil-rubbed bronze, satin brass, satin bronze/anodized, satin black/anodized and satin clear/anodized.
- Back-mount install: Attaches behind the drawer front so the face stays unbroken.
- Slim 1/2 in width: The 1/2 in wide profile with 1-9/16 in projection keeps a low, tidy stance.
- Continuous-run length: A 6 ft long satin clear/anodized version suits long handle runs.
- Fits common panels: Designed for 1/2 to 7/8 in thick material.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | EPCO |
| Sell unit | 1 piece |
| Collection | DP41 |
| Product type | Back-mount drawer pull |
| Available finishes | Oil-Rubbed Bronze, Satin Black/Anodized, Satin Brass, Satin Bronze/Anodized, Satin Clear/Anodized |
| Available sizes | 1 in CC (1-1/2 in L), 2 in CC (3 in L), 6 ft L; all 1/2 in W |
| Center to center | 1 in CC or 2 in CC (6 ft version: CC not stated) |
| Overall length / width / projection | 1-1/2 in or 3 in L x 1/2 in W, 1-9/16 in projection; 6 ft version: 6 ft L x 1/2 in W |
| Material | Aluminum |
| Color / finish | Satin Clear/Anodized (as listed); four other finishes available |
| Intended use | Drawer fronts and doors 1/2 - 7/8 in thick |
Fit and Compatibility:
Requires 1 in or 2 in CC holes drilled from the back of drawer fronts 1/2 to 7/8 in thick. The 6 ft length is a separate continuous-run version whose CC and screws are not stated in the source.
Frequently Asked Questions (FAQ):
Q: Which sizes are available?
A: 1 in CC with 1-1/2 in overall length, 2 in CC with 3 in overall length, and a 6 ft long x 1/2 in wide continuous length.
Q: Which finish should I pick?
A: Oil-rubbed bronze suits traditional rooms, while the satin anodized finishes (brass, bronze, black, clear) fit modern cabinetry.
Q: What does back mount mean?
A: The pull fastens through the back of the drawer front, leaving the face free of visible screws.
Q: Will it fit my drawers?
A: It is designed for 1/2 to 7/8 in thick material; measure both thickness and CC hole spacing first.
Q: Are screws included?
A: The source does not state screw sizes or inclusion for the DP41, so confirm fastener needs before installing.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The DP41's small CC spacings make it the go-to pick for narrow drawers, tray inserts and inset doors where a long pull would overwhelm the front. Keep one finish across the kitchen and use the 6 ft length on pantry or appliance panels for continuity. Always verify panel thickness, since back-mount posts need material in the stated 1/2 to 7/8 in range to clamp properly.
Drill back-side mounting holes with a backing board to avoid splintering the finished face of thin drawer fronts.
Order the EPCO DP41 aluminum back-mount pull in your choice of five finishes for compact drawers and doors.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
