Skip to content
EPCO DP40 Aluminum Drawer Pull 1-7/8 in CC 3-7/8 in Long Back Mount Satin Anodized Finishes
Regular price $10.71Orders start at $399 — combine any items to reach the minimum. Learn more
EPCO DP40 Aluminum Drawer Pull 1-7/8 in CC 3-7/8 in Long Back Mount Satin Anodized Finishes
The EPCO DP40 is a back-mount aluminum drawer pull with a 1-7/8 in CC (center-to-center) spacing, 3-7/8 in length and 3/4 in width, for 1/2 to 7/8 in thick material. This line comes in four finishes: satin brass, satin bronze/anodized, satin black/anodized and satin clear/anodized, plus a 6 ft long satin clear version for long runs. Each pull includes two #6 x 5/8 in screws.
Key Features:
- Back-mount design: Mounts behind the drawer front for a clean, fastener-free face.
- Aluminum construction: Lightweight aluminum with anodized satin finishes that resist wear.
- Four finish choices: Available in satin brass, satin bronze/anodized, satin black/anodized and satin clear/anodized.
- Long-run option: A 6 ft long x 3/4 in wide satin clear/anodized version suits continuous handle runs.
- Screws included: Includes (2) #6 x 5/8 in screws.
- Fits common thicknesses: Designed for 1/2 to 7/8 in thick drawer fronts and doors.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | EPCO |
| Sell unit | 1 piece |
| Collection | DP40 |
| Product type | Back-mount drawer pull |
| Available finishes | Satin Black/Anodized, Satin Brass, Satin Bronze/Anodized, Satin Clear/Anodized |
| Available sizes | 1-7/8 in CC, 3-7/8 in L x 3/4 in W; also 6 ft L x 3/4 in W |
| Center to center | 1-7/8 in CC |
| Overall length / width / projection | 3-7/8 in L x 3/4 in W, 1-5/8 in projection (6 ft version: 6 ft L x 3/4 in W) |
| Mounting | Back mount, includes (2) #6 x 5/8 in screws |
| Material | Aluminum |
| Color / finish | Satin Brass (as listed); satin black/anodized, satin bronze/anodized and satin clear/anodized also available |
| Intended use | Drawer fronts and doors 1/2 - 7/8 in thick |
Fit and Compatibility:
Fits drawer fronts or doors 1/2 to 7/8 in thick with 1-7/8 in CC holes drilled from the back. The 6 ft length is a separate continuous-run version; screws are included only with the 1-7/8 in CC pull per the listing.
Frequently Asked Questions (FAQ):
Q: What finishes can I choose?
A: Satin brass, satin bronze/anodized, satin black/anodized and satin clear/anodized, plus a 6 ft satin clear/anodized length.
Q: What does back mount mean?
A: The pull attaches behind the drawer front, so no screws show on the face; holes are drilled through the front at 1-7/8 in CC.
Q: What panel thickness does it fit?
A: It is designed for material 1/2 to 7/8 in thick.
Q: Are screws included?
A: Yes, the pull includes two #6 x 5/8 in screws.
Q: What is the 6 ft version for?
A: The 6 ft x 3/4 in length is for long continuous pull runs on wide doors or appliance panels.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Back-mount pulls like the DP40 are a good choice when you want an uninterrupted drawer face, common on European-style frameless cabinetry. Confirm your panel is 1/2 to 7/8 in thick before ordering, and drill the 1-7/8 in CC holes squarely from the back so the posts seat flush. Pick the 6 ft length only if you are cutting a continuous handle to size on site.
Drill from the back side with backing material to prevent blow-out on the finished face of the drawer front.
Choose the EPCO DP40 aluminum back-mount pull for a hidden-fastener handle in four satin finishes.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
