Skip to content
Elevate Water Based Bonding Adhesive P, Pink to Clear, 5 Gallon Pail
Regular price $315.00Orders start at $399 — combine any items to reach the minimum. Learn more
Elevate Water Based Bonding Adhesive P, Pink to Clear, 5 Gallon Pail
Elevate Water Based Bonding Adhesive P is a 5-gallon contact adhesive for bonding RubberGard EPDM, UltraPly TPO, and FormFlash membrane to acceptable substrates. It serves as a water-based alternative to Elevate solvent-based bonding adhesives. One gallon covers a nominal 100–120 sq ft when coating both surfaces by roller.
Key Features:
- Water-based formula: A water-based alternative to Elevate solvent-based bonding adhesives.
- Broad membrane fit: Designed for RubberGard EPDM, UltraPly TPO, and FormFlash membrane products.
- Contact adhesive: Applied as a contact adhesive to bond membrane to acceptable substrates.
- Efficient coverage: Nominal coverage of 100–120 ft² per gallon coating both surfaces with roller application.
- One-year shelf life: One-year shelf life when stored in the original sealed container at 60–80 °F.
- Code-rated assemblies: Consult the Elevate Code Approval Guide for specific FM and UL rated assemblies.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Sell unit | 1 pail, 5 gal |
| Product line | Elevate Water Based Bonding Adhesive P |
| Color / finish | Pink to clear |
| Pack size | 5 gal pail |
| Coverage per unit | 100–120 ft² per gallon (2.5–2.9 m² per liter), coating both surfaces, roller application |
| Type | Water-based contact adhesive |
| Compatible membranes | RubberGard EPDM, UltraPly TPO, FormFlash |
| Shelf life | 1 year stored sealed at 60–80 °F (16–27 °C) |
| Application method | Roller, coating both surfaces |
| Ratings guidance | Consult Elevate Code Approval Guide for FM and UL rated assemblies |
Coverage & How Much You Need:
Nominal 100–120 ft² per gallon when coating both membrane and substrate surfaces by roller, depending on substrate. A 5-gallon pail covers roughly 500–600 ft² on that basis.
Fit and Compatibility:
Formulated for Elevate RubberGard EPDM, UltraPly TPO, and FormFlash membranes on acceptable substrates. Check the Elevate Code Approval Guide before using it in FM or UL rated assemblies.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 5-gallon pail of Water Based Bonding Adhesive P in pink-to-clear formulation.
Q: How far does a pail go?
A: At the nominal rate of 100–120 ft² per gallon coating both surfaces, a 5-gallon pail covers approximately 500–600 ft², depending on substrate.
Q: How should it be stored?
A: Store in the original sealed container at 60–80 °F for an expected shelf life of one year.
Q: Which membranes does it bond?
A: It is designed for RubberGard EPDM, UltraPly TPO, and FormFlash membrane products.
Q: Can I use it in FM or UL assemblies?
A: Consult the appropriate Elevate Code Approval Guide for specific FM and UL rated assemblies.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Apply to both membrane and substrate surfaces with a roller for proper contact adhesion, and respect the listed coverage rate to avoid starved joints. Choose the water-based version when solvent adhesive handling or VOC concerns are a factor on the site. Always confirm membrane-substrate compatibility with Elevate specifications before full production.
Consult the product safety data sheet and wear appropriate PPE; work in ventilated conditions and keep adhesive off skin and eyes.
Get Elevate Water Based Bonding Adhesive P in the 5-gallon pail for your next EPDM or TPO job.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
