Elevate SBS Glass FR Torch Modified Bitumen Membrane, 39.4 in. x 33 ft. 6 in. Roll, Fiberglass-Reinforced

Elevate SBS Glass FR is a torch-applied SBS modified bitumen membrane reinforced with a 90 g/m2 (1.8 lb/100 ft2) fiberglass mat for low-slope commercial roofs. Each sell unit is one roll measuring 39.4 in. x 33 ft. 6 in. It suits both new construction and reroofing and pairs with other Elevate BUR and modified bitumen system components.

Key Features:

• SBS rubber modified: SBS rubber optimizes the natural waterproofing characteristics of asphalt and increases system performance.
• Fiberglass reinforcement: The membrane is reinforced with a 90 g/m2 (1.8 lb/100 ft2) fiberglass mat.
• Thermal resistance: The proprietary SBS compound provides resistance to thermal and physical forces over a wide range of temperatures.
• New or reroof: SBS Glass FR Torch is ideal for both new construction and reroofing applications.
• Complex roofs: Low-slope roofs of any size, even those with numerous penetrations, can accommodate an SBS Glass FR Torch application.
• Torch applied: This is the torch-grade version of the SBS Glass FR membrane line.

Specifications Table:

Coverage & How Much You Need:

One 39.4 in. x 33 ft. 6 in. roll provides roughly 110 square feet of membrane; plan laps and curb detail runs into your square footage, and order rolls per roofing square with standard side and end laps included in your takeoff.

Fit and Compatibility:

Designed for Elevate low-slope modified bitumen roof systems and compatible with Elevate BUR and MB system assemblies. Primers, base sheets, adhesives and accessory products are sold separately; confirm the approved system assembly with the membrane specification for your project.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One roll of Elevate SBS Glass FR membrane, 39.4 in. x 33 ft. 6 in., in your selected color.

Q: Which colors are offered?
A: Four variants: Ultra White Torch, White Torch, White and Ultra White.

Q: How is it installed?
A: This is the torch-applied grade, heat-welded to the approved substrate by trained installers.

Q: What reinforcement does it use?
A: A 90 g/m2 (1.8 lb/100 ft2) fiberglass mat.

Q: Can it be used on an existing roof?
A: Yes, it is described by the manufacturer as ideal for both new construction and reroofing applications.

Q: Will it work on roofs with many penetrations?
A: Yes, low-slope roofs of any size, even those with numerous penetrations, can accommodate this application.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

SBS-modified membranes give you the elastomeric flexibility needed where thermal cycling is severe, and the fiberglass mat adds dimensional stability during torching. Choose a white or ultra white cap for reflective performance and a torch grade only when your crew is qualified for hot-air or open-flame work. Order all system components from the same Elevate specification so the assembly remains consistent.

Torch application involves open flame and follows the fire-risk guidance for modified bitumen work; only trained installers should torch, with fire watch and extinguishing equipment on site.

Order your Elevate SBS Glass FR Torch membrane rolls in the color and finish your project needs today.