Skip to content
Elevate QuickSeam EcoWhite EPDM Joint Cover, 5.75 in. Uncured Flashing with Tape Backing
Regular price $7.07Orders start at $399 — combine any items to reach the minimum. Learn more
Elevate QuickSeam EcoWhite EPDM Joint Cover, 5.75 in. Uncured Flashing with Tape Backing
Elevate QuickSeam EcoWhite EPDM Joint Cover is uncured FormFlash laminated to QuickSeam tape, in EcoWhite, 5.75 in. wide, sold by the piece. A second 3 in. layer of flowable uncured QuickSeam tape runs down the center, letting the cover conform to irregular surfaces such as T-joints and seal them reliably. Use it at field seam intersections and plane changes on walls and curbs.
Key Features:
- Uncured EPDM flashing: Uncured FormFlash laminated to QuickSeam tape for flexible, conformable sealing.
- Center tape layer: A second 3 in. layer of special uncured, flowable QuickSeam tape is applied at the center.
- Conforms to irregularities: Readily conforms to irregular surfaces such as those found at T-joints for an excellent seal.
- T-joint solution: Designed for T-joints formed where field seams intersect.
- Plane-change flashing: Used as a joint cover for seams at changes in plane on wall or curb flashings.
- EcoWhite color: EcoWhite finish suits reflective or white EPDM roof systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Sell unit | 1 piece, 5.75 in. |
| Product line | QuickSeam EcoWhite EPDM Joint Covers |
| Available colors | EcoWhite |
| Available sizes | 5.75 in. |
| Material | Uncured EPDM (FormFlash) laminated to QuickSeam tape |
| Width | 5.75 in. |
| Center tape layer | 3 in. (76.2 mm) uncured, flowable QuickSeam tape |
| Intended use | Joint cover at T-joints and seams at changes in plane on wall or curb flashings in EPDM systems |
| Installation | Bonded with QuickSeam tape; primer such as QuickPrime Plus where required by Elevate Specifications |
Fit and Compatibility:
Designed for Elevate RubberGard EPDM systems, including EcoWhite membranes, wherever QuickSeam products are specified. Use with QuickPrime Plus Low-VOC primer where required by Elevate Specifications and Details; primer sold separately.
Frequently Asked Questions (FAQ):
Q: What is this product?
A: It is an uncured EPDM flashing (FormFlash) laminated to QuickSeam tape with an additional 3 in. layer of flowable tape at the center, 5.75 in. wide, in EcoWhite.
Q: Where is it used?
A: At T-joints formed by intersecting field seams and as joint covers for seams at changes in plane on wall or curb flashings.
Q: Why the center tape layer?
A: The flowable center tape helps the cover conform to irregular surfaces at T-joints and provide an excellent seal.
Q: Does it need primer?
A: Apply QuickPrime Plus Low-VOC where required by Elevate Specifications and Details before installing QuickSeam products.
Q: What is the sell unit?
A: One piece, 5.75 in. wide.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Keep these joint covers on the truck for T-joint repairs and detailing in white EPDM systems; the flowable center tape makes sealing seam intersections far easier than cutting cured flashing. Clean and prime the membrane with QuickPrime Plus Low-VOC using a QuickScrubber pad before application, and roll the cover firmly to ensure full contact. Store flat and away from heat to preserve the uncured rubber.
Use QuickPrime Plus and sealants only in well-ventilated areas per the product safety information, and wear gloves when handling primed or uncured rubber materials.
Order Elevate QuickSeam EcoWhite EPDM Joint Covers for fast, reliable T-joint sealing.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
